517972
19
Zoom out
Zoom in
Previous page
1/120
Next page
PerfectView Safety and installation instructions
19
When the negative terminal of the battery is disconnected, all data stored in the volatile
memory will be lost.
z The following data must be set again, depending on the vehicle equipment options:
radio code
vehicle clock
–timer
on-board computer
seat position
You can find instructions for making these settings in the appropriate operating
instructions.
Observe the following installation instructions:
z Secure the parts of the camera installed in the vehicle in such a way that they cannot
become loose under any circumstances (sudden braking, accidents) and cause inju-
ries to the occupants of the vehicle.
z Secure any parts of the system covered by the bodywork in such a manner that they
cannot be come loose or damage other parts and cables and impair vehicle functions
(steering, pedals, etc).
z To prevent damage, when drilling ensure that there is sufficient space on the other
side for the drill head to come out (fig. 1, page 3).
z Deburr all drill holes and treat them with a rust-protection agent.
z Always follow the safety instructions of the vehicle manufacturer.
Some work (e.g. on retention systems such as the AIRBAG etc.) may only be per-
formed by qualified specialists.
Observe the following instructions when working with electrical parts:
z Only use a diode test lamp or voltmeter to test voltages in electric cables.
Test lamps with an illuminant consume voltages which are too high and which can
damage the vehicle’s electronic system.
z When making electrical connections, ensure that
they are not kinked or twisted
they do not rub on edges
they are not laid in sharp edged ducts without protection (fig. 2, page 3).
z Insulate all connections.
z Secure the cables against mechanical wear with cable binders or insulating tape,
for example to existing cables.
CAM30_CAM40.book Seite 19 Donnerstag, 14. Januar 2010 5:32 17
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Waeco CAM30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Waeco CAM30 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info