513120
32
Zoom out
Zoom in
Previous page
1/180
Next page
Customizing
Page 28
ADJUSTING THE DISPLAY
FACTORY PRESETS, AUTO-SYNC, AND USER SETTINGS
Factory presets: For optimal display quality, set your video card to the DTF-720’s native resolution of
1280 x 1024 pixels. See page 50 for signal specifications.
Auto-sync: The DTF-720 attempts to automatically synchronize to the incoming signal. Auto-sync will
function when the horizontal frequency is between 30 to 80 kHz and the vertical frequency is between
50 to 75 Hz. If the DTF-720 does not automatically synchronize with the incoming signal, you can use
the On Screen Display (OSD) RESET AUTO ADJUST option to initiate display synchronization. Further
screen display adjustments can be manually made using the OSD controls.
User settings: When you manually set the display using the OSD function, the settings are stored
within the DTF-720 for use the next time the unit receives a similar signal. This is applicable to all
display modes.
ON SCREEN DISPLAY (OSD) SETTINGS
The OSD function enables you to adjust and optimize a variety of display settings at the touch of a
button. The OSD controls are located on the upper left edge of the unit.
The basic process for working with the OSD is as follows:
Press the MENU button to open the OSD main menu.
Use the + or – buttons to select an option. When the option you want to adjust is highlighted,
press the E
NTER button. The current settings and adjustment sub-menu for that option will appear.
Use the + or – buttons to adjust the option settings.
After making your changes, press the ENTER button to save. To exit, press the MENU button.
Note: All settings are automatically saved when the OSD menu closes. If you make changes to the display
appearance and cannot return to the original settings, use the
RESET RECALL option to return the DTF-720 to
its original factory defaults.
Menu button
Opens or closes the OSD menu.
Selection buttons
Use these buttons to select an option that can be activated
when you press the E
NTER button. After activating a selected
option, press the + button to increase a selected item value,
and press the – button to decrease it.
ENTER button
Activates or deactivates the
selected OSD menu option.
+
DTF720_Manual.fm Page 28 Monday, December 22, 2008 10:13 AM
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wacom PL 720 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wacom PL 720 in the language / languages: English, German, French as an attachment in your email.

The manual is 3,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info