596644
64
Zoom out
Zoom in
Previous page
1/116
Next page
64
Index
Contents
64
Index
Contents
TESTING YOUR TABLET
Turn on your computer and wait until the system has fully loaded. Ensure that your computer has a
working Bluetooth connection, either through built-in Bluetooth support or a USB-to-Bluetooth adapter
(dongle).
1. Check the tablet connection in USB mode
. A tablet status LED will light whenever the tablet is properly
connected via the USB cable and your computer has registered it as a USB device. If an LED does not
glow, then:
Verify that the tablet power switch is in the on position.
Make sure the USB cable is securely connected to the tablet and to an active USB port on your
computer. Intuos4 requires that you connect to a primary USB port (located directly on your
computer) or to a powered USB hub.
If you are connecting the tablet to a powered USB hub, be sure the USB hub is properly connected
to your computer and is active.
Connect the tablet to a different powered USB port or try connecting to the powered USB port on
another computer.
If a status LED does not illuminate after your computer is on and has finished booting up, your USB
port may be disabled. Verify that you have connected the tablet to an active USB port.
For best results when troubleshooting no power to the tablet (a status LED does not light), plug the
tablet directly into the system USB port located on your computer. Temporarily eliminate any
external hubs in use until you determine that the system recognizes the tablet and that it is
functional. When the tablet is working properly, it is usually okay to then move the tablet to a
powered USB hub.
2. Check the tablet connection in wireless mode
. A tablet status LED will light whenever the tablet is
properly connected and your computer has registered it as a Bluetooth enabled device. If an LED does
not glow, then:
Verify that the tablet power switch is in the on position.
Check the battery power. If the battery status light glows green the battery is charged, if it glows
red the battery charge is low. If your battery charge is low, plug in the USB cable. With the USB
cable properly connected, the battery status light will glow yellow when charging, and a steady
green when fully charged.
If the tablet wireless connection light glows a steady blue, your Bluetooth connection is working.
Otherwise, it is not. Open the Bluetooth control panel and make sure the tablet was not
disconnected. If not disconnected, see step 3, following.
Switch the tablet power off, then back on.
Reset the tablet by disconnecting both the battery and the USB cable (if in use) for at least 10
seconds. Then reconnect the tablet battery and try again.
64


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wacom Intuos 4 Wireless at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wacom Intuos 4 Wireless in the language / languages: English as an attachment in your email.

The manual is 5,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info