564438
56
Zoom out
Zoom in
Previous page
1/73
Next page
56
IndexContents
56
56
IndexContents
56
Contents
Index
Contents
Index
The pen tip does not function. Be sure you are using only a compatible Wacom pen, such as the pen
that shipped with your product, or a Wacom accessory tool specified
for use with Intuos. Other pens may not function properly on the tablet.
Check the control panel P
EN tab and verify that a CLICK function is
assigned to the tip.
The Status LED should brighten when the tip is pressed. If not, you may
have defective hardware. See Testing the tablet controls and tools
.
Changing the settings of the
pen or other tool has no effect.
Make sure you are changing the settings for the tool and application
that you are using. See Creating an application-specific setting
.
The pen side switch does not
work.
Be sure you are using only a compatible Wacom pen, such as the pen
that shipped with Intuos or a Wacom accessory tool specified for use
with Intuos. Other pens may not function properly on the tablet.
Be sure to press the side switch when the pen tip is within 10 mm (0.4
inch) of the tablet active area. Do this without pressing down on the
pen tip.
In the Wacom Tablet control panel, verify that the side switch is set to
the function you are expecting to occur for the application and tool you
are using.
Check the S
IDE SWITCH MODE. If CLICK & TAP is selected, you will need
to first press the side switch while touching the pen tip to the tablet
surface in order to perform a click function. See Options
.
The Status LED should brighten when you press the side switch.
If not, you may have defective hardware. See Testing your tablet
.
The screen cursor “jumps”
back.
Do not place an Intuos tool on the tablet when it is not in use, or when
you are using another pointing device. Leaving your tool on the tablet
may interfere with screen cursor positioning when using other input
devices.
You cannot move the cursor
where you want to on the
screen, or the line you are
drawing does not line up with
the location of the pointer in
paint applications.
Open the Wacom Tablet control panel and go to the M
APPING tab.
Verify that P
EN MODE is selected and that the SCREEN AREA is set to
F
ULL for the selected tool and application. If this does not help, click on
the D
EFAULT button to reestablish tablet to screen mapping. If you are
still having difficulty, remove the tablet preferences (see Windows-
specific problems or Mac-specific problems).
Confirm whether the pen does (or does not) function. See Testing the
tablet controls and tools.
When using Intuos on a
multiple monitor system, you
cannot use the pen to control
the other monitor(s).
Cycle pen control for Intuos between your displays by pressing an
ExpressKey or pen button that is set to D
ISPLAY TOGGLE.
Verify that the S
CREEN AREA in the MAPPING tab is set to FULL.
You can also use your pen to control the other monitors in mouse
mode. To use mouse mode, first set a pen button to M
ODE TOGGLE....
Then use the button to toggle between P
EN MODE and MOUSE MODE.
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wacom Intuos - CTH-460 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wacom Intuos - CTH-460 in the language / languages: English as an attachment in your email.

The manual is 2,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Wacom Intuos - CTH-460

Wacom Intuos - CTH-460 User Manual - German - 73 pages

Wacom Intuos - CTH-460 User Manual - Dutch - 73 pages

Wacom Intuos - CTH-460 User Manual - French - 73 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info