564438
53
Zoom out
Zoom in
Previous page
1/73
Next page
53
IndexContents
53
53
IndexContents
53
Contents
Index
Contents
Index
TESTING THE EXPRESSKEYS
1. With the DIAGNOSTICS dialog box open, observe the TABLET INFO column as you test each ExpressKey.
Be sure to select the tablet unit you are testing from the T
ABLET INFO column.
2. Test the keys by pressing them one at a time. Each time you press a key, its number is shown next to
the L
EFT BUTTONS category.
3. When you are done, click the C
LOSE button to exit the dialog box.
Important: Some applications can override and control the ExpressKey functions. Consider closing
any open applications except the Wacom Tablet control panel when testing the ExpressKeys.
For details, see Using applications integrated for tablet control
.
TESTING A PEN
1. With the DIAGNOSTICS dialog box open, and while observing the POINTING DEVICE INFO column, bring
your pen within 10 mm (0.4 inch) of the tablet active area. A value for P
ROXIMITY, the DEVICE NAME,
D
EVICE TYPE, and a DEVICE S/N (serial number) should be displayed.
2. Move your tool along the tablet surface. The X and Y D
ATA values should change to reflect the tool
position.
3. Test your pen switches. The Status LED should brighten each time you click with the tip, press the side
switch, or press the eraser to the tablet.
Click on the tablet surface with the tip. The S
WITCHES state and PRESSURE value should change.
P
RESSURE should change from approximately 0% with no pressure applied to approximately 100%
when full pressure is applied.
Next, press the side switch without pressing the tip to the tablet. The S
WITCHES state should
change. For the Intuos pen, do this for both positions of the side switch.
Press the eraser to the tablet. The S
WITCHES state and PRESSURE value should change.
P
RESSURE should change from approximately 0% with no pressure applied to approximately 100%
when full pressure is applied.
4. Slowly rotate the pen on its axis. The R
OTATION value should change as you rotate the pen.
5. When you are done, click on the C
LOSE button to exit the dialog box.
Pen
SWITCHES states
Tip = 1
Side switch (lower position) = 2
Side switch (upper position) = 3
Eraser = 1
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wacom Intuos - CTH-460 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wacom Intuos - CTH-460 in the language / languages: English as an attachment in your email.

The manual is 2,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Wacom Intuos - CTH-460

Wacom Intuos - CTH-460 User Manual - German - 73 pages

Wacom Intuos - CTH-460 User Manual - Dutch - 73 pages

Wacom Intuos - CTH-460 User Manual - French - 73 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info