Manual Wacom DTU1931 (page 44 of 172) (English, German, French)

513137

Zoom out

Zoom in

1/172

Appendix

Page 40

USING AN ALTERNATE MOUNT OR STAND

If you will be using the DTU-1931 in an installation that requires the use of an alternate mounting

platform, you can remove the adjustable stand from the unit and mount the pen display onto any

mount arm or stand conforming to the VESA 100 mm standard.

Mounting screws that are 4 mm wide with a 0.7 mm pitch (M4 Regular), with a screw clearance

depth of 15 mm are required. Exceeding the clearance depth of 15 mm will damage the pen display

internal components.

To remove the adjustable stand and

attach the pen display to a different

mounting platform:

1. Turn off your computer and power off

the DTU-1931. Then disconnect all

cables from between the unit and

your computer.

2. Protect the display screen surface by

spreading a soft cloth onto a flat

table and placing the DTU-1931 face

down on the cloth.

3. Remove the four screws and lift the

adjustable stand assembly away

from the body of the unit.

4. Using the appropriate screws for

your mounting platform, firmly attach

the DTU-1931 to the alternate

mounting platform.

5. Refer to the Installation instructions,

beginning on page 11, and reattach

the cabling.

CAUTION

When attaching the DTU-1931 onto an alternate

mounting platform, be sure to follow all instructions

in the documentation supplied by the platform

manufacturer. If improperly installed, the unit could

fall, resulting in damage to the unit or physical injury.

DTU193_Manual.fm Page 40 Monday, September 15, 2008 2:42 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Wacom DTU1931 in the language / languages: English, German, French as an attachment in your email.

The manual is 6,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Wacom DTU1931 Manual

Product: