596627
38
Zoom out
Zoom in
Previous page
1/62
Next page
38
IndexContents
38
IndexContents
Interactive pen display
TESTING THE INTERACTIVE PEN DISPLAY
1. If the pen status LED does not light, check the following:
If the light is not on, make sure that your computer is turned on and properly connected to the pen
display. Make sure the USB cable is firmly connected to the pen display and computer.
2. If there is no display:
Make sure that your computer is turned on. The LED will light blue when the proper video signal is
received.
Make sure that the Wacom tablet and DisplayLink or MCT drivers are installed properly.
Make sure the USB cable is firmly connected to the pen display and computer.
3. Verify that the tablet portion of your pen display and pen are working:
Press the pen tip against the display and verify that the LED lights blue.
If the LED does not light, verify that the USB cable is plugged into an active USB port. If the
interactive pen display is plugged into a USB hub, try plugging it directly into the USB port on your
computer. If you are using only one USB connector to connect the pen display with your computer,
plug in the other connector if you have an additional USB port available on your computer.
Be sure that the USB port(s) to which you are connecting has not been disabled. It may be
necessary to check your system BIOS setting to verify that you have connected the pen display to
an active USB port. The LED will light blue when the pen display is registered as a USB device and
the pen tip is pressed against the display.
4. Check the pen. If you cannot make a selection on the display screen with the pen:
Test the pen by pressing the pen tip against the surface of the pen display. The LED should light
blue.
Without applying pressure to the pen tip but keeping the pen within 5 mm (0.2 inch) of the pen
display surface, press the pen switch. The LED should again light blue.
If the LED does not light blue for these tests, be sure you are using a pen specified for use with your
product.
•See testing your pen
for detailed information.
If you are still having problems, you may have a defective pen or pen display.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wacom DTU-1031X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wacom DTU-1031X in the language / languages: English as an attachment in your email.

The manual is 2,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info