Manual Wacom DTF-720 (page 26 of 180) (English, German, French)

513121

Zoom out

Zoom in

1/180

Customizing

Page 22

CALIBRATING THE DTF-720

You must calibrate the pen display tablet in order to align the screen cursor position with the position of

the pen on the display screen. This is required to adjust for parallax caused by the display screen cover

glass and coating. Set the DTF-720 in its working position, then follow the procedure below.

Important: Make sure the display is properly

adjusted before calibrating the tablet.

See Adjusting pitch and phase on page 31, and

Adjusting the display beginning on page 28.

• In the Pen Tablet control panel, select the

ALIBRATE tab.

• If you are working with multiple monitors, select

the M

ONITOR corresponding to the DTF-720

display. (Only monitors that are set to one of the

resolutions supported by the DTF-720 will

appear in the list.)

• Click on the C

ALIBRATE... button to activate the

calibration screen.

• Hold the pen and position your head as you

normally do when working with the pen display.

Use the pen tip to click on the center of the

crosshairs in the upper-left corner.

• Then click on the center of the crosshairs that

are displayed in the lower-right corner.

• Test the alignment by positioning the pen at a

few different points on the display. Click OK to

accept the calibration. Click T

RY AGAIN to

recalibrate.

Be sure to read the directions in the calibration

screen for detailed instructions and additional

options. The calibration setting applies to all

applications.

Crosshairs

Adjustment pattern for pitch and phase.

See Adjusting pitch and phase on page 31

for details.

Notes:

If you prefer to see the screen cursor slightly offset from the actual position of the pen tip, calibrate by

clicking on a spot showing that offset from the crosshairs. For example, to have the screen cursor appear

1/10th of an inch above and to the left of the pen tip, calibrate by clicking on a spot 1/10th of an inch below

and to the right of the crosshairs.

To calibrate two pen displays, ﬁrst touch the pen to pen display #1 and open the control panel without

touching the pen to pen display #2. In the control panel, select the correct monitor and calibrate pen display

#1. Close the control panel, touch the pen to pen display #2, and again open the control panel without

touching the pen to pen display #1. Select the correct monitor and calibrate pen display #2.

DTF720_Manual.fm Page 22 Monday, December 22, 2008 10:13 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Wacom DTF-720 in the language / languages: English, German, French as an attachment in your email.

The manual is 3,54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Wacom DTF-720 Manual

Product: