513121
15
Zoom out
Zoom in
Previous page
1/180
Next page
Installation
Page 11
STEP 1: LCD MONITOR INSTALLATION
In the first stage of the installation process, the DTF-720 is installed as a monitor on your system.
As you work through the first stage of the installation process, please refer to the LCD monitor cabling
diagram on the following page when making cable connections.
Important: Do not connect the USB data cable until instructed to do so.
Turn off your computer.
Caution: Never connect or disconnect the video or power cables while your computer or DTF-720
are powered on – this can damage the display or video card.
If your computer has only one analog (VGA) video connector, you will need to unplug your previous
monitor or add a second VGA card.
Connect the power adapter to the DTF-720. Then connect the adapter’s power cable and plug the
adapter into an AC outlet. See – B – and – C –
Turn on the DTF-720. The power LED will light orange.
Plug one end of the VGA cable into the DTF-720. Plug the other end of
the cable into the VGA connector on your computer’s video card. See
A – in the connection diagram on page 12. Be sure to tighten the
thumbscrews on the connectors.
VGA connector
DTF720_Manual.fm Page 11 Monday, December 22, 2008 10:13 AM
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wacom DTF-720 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wacom DTF-720 in the language / languages: English, German, French as an attachment in your email.

The manual is 3,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info