513118
98
Zoom out
Zoom in
Previous page
1/113
Next page
Contents
Index
Contents
98
Index
98
USING AN ALTERNATE MOUNT OR STAND
If using Cintiq in an installation that requires the use of an alternate mounting platform, you can remove the
Cintiq display stand from the unit and mount the pen display onto any stand or mounting platform
conforming to the VESA MIS-E 100/200 (6 screw) standard.
Notes:
Required mounting screws are 4 mm wide with a 0.7 mm pitch (M4), with a screw clearance depth of
17 mm. Exceeding the clearance depth of 17 mm will damage the internal components of the pen
display. These screws were provided with your product accessories.
The combined weight of this product (pen display and display stand) is approximately 29 kg (64 lbs).
Any table or platform on which this product is installed must be able to support the combined weight
of the Cintiq interactive pen display and Cintiq display stand.
The pen display portion of this product weighs 16 kg (35.2 lbs). Any platform or fixture on which the
pen display alone is mounted must be able to support the weight of the Cintiq interactive pen
display.
To remove the pen display from the display stand:
1. Turn off your computer and power off the pen display.
2. See removing Cintiq from the display stand
.
To attach the pen display to a VESA mount
:
1. Review the instructions that came with your stand or
mounting platform. Be sure you understand them, and
follow all instructions carefully. Pay attention to any
cautions or other safety information.
2. Locate the provided VESA mount spacers to match the
lower three screw positions on the back of Cintiq.
3. Using the appropriate screws for your mounting platform
and as indicated above, firmly attach the pen display to
the platform.
4. As applicable, attach the appropriate cabling between
the pen display and your computer. Be sure to replace
the pen display cable connector covers.
To remove the pen display from a VESA stand
, reverse the
above procedure. Then see mounting Cintiq on the display
stand.
Warning
When attaching the pen display onto an alternate mounting platform, be sure to follow all instructions in the
documentation supplied by the platform manufacturer. If improperly installed, the unit could fall, resulting
in physical injury or damage to the unit.
Spacers
98


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wacom Cintiq 24HD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wacom Cintiq 24HD in the language / languages: English as an attachment in your email.

The manual is 6,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Wacom Cintiq 24HD

Wacom Cintiq 24HD Additional guide - German - 21 pages

Wacom Cintiq 24HD User Manual - German - 160 pages

Wacom Cintiq 24HD Additional guide - Dutch - 21 pages

Wacom Cintiq 24HD User Manual - Dutch - 160 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info