596628
48
Zoom out
Zoom in
Previous page
1/76
Next page
Troubleshooting
Page 46
The pen side switch does
not work.
Be sure you are using the pen that originally came with your pen
display, or an Intuos3 pen. Other pens may not function properly.
Be sure you press the side switch when the pen tip is within 5 mm
(0.2 inch) of the pen display active area – do this without pressing
down on the pen tip.
From the Wacom Tablet control panel, verify that the side switch is
set to the proper function you are expecting to occur for the
application (and input tool) you are using. Check also which S
IDE
S
WITCH MODE option is selected. (These options are accessed by
clicking on the control panel O
PTIONS... button.)
Make sure the status LED lights blue when you press the side
switch. If the LED does not light, verify that the USB cable is
plugged into an active USB port on your computer or on a USB hub.
If the LED still does not light, you may have defective hardware
(see “Troubleshooting” on page 37).
The pen tip and screen
cursor do not properly line
up.
Open the Wacom Tablet control panel and select the C
ALIBRATE tab.
Continue with “Calibrating Cintiq” on page 29.
The screen cursor moves
but does not jump to the
pen tip location on the
display screen, and does
not follow the pen tip when
the pen is moved across
the display.
Make sure the Wacom tablet driver has loaded properly by opening
the Wacom Tablet control panel. If the driver did not load you will
see an error message. If an error message appears, reboot your
computer. If the problem persists, see the Installation instructions
and reinstall the Wacom tablet software. (For Macintosh, you must
restart your computer after installing the Wacom tablet driver for
proper tablet operation.)
If you have customized the side switch on your pen to toggle
between P
EN mode and MOUSE mode, make sure that your pen
display is operating in P
EN mode.
When using Cintiq on a
multiple display system,
you cannot use the pen to
control the other display(s).
Make sure that one of the ExpressKeys is set to D
ISPLAY TOGGLE, and
then press that key to cycle between pen control for the Cintiq and
your other displays. See the electronic Software User’s Manual for
details on working with D
ISPLAY TOGGLE.
You can also use your pen to control the other displays in M
OUSE
mode. To use M
OUSE mode, first set the pen’s DuoSwitch to MODE
T
OGGLE.... Then use the switch to toggle between PEN mode and
MOUSE mode.
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wacom Cintiq 12WX - DTZ 1200W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wacom Cintiq 12WX - DTZ 1200W in the language / languages: English as an attachment in your email.

The manual is 1,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info