596631
37
Zoom out
Zoom in
Previous page
1/49
Next page
35
D I S P L A Y T R O U B L E S H O O T I N G
If you encounter problems with the Cintiq display, refer to the following table. Your problem may
be described here, and you can try the solution offered. For additional information about color
issues, refer to the documentation that came with your operating system or applications.
General Problems Solutions
No display. The power LED is off.
No display. The power LED is lit
green.
The LED is lit orange.
The following message appears
briefly on your display screen:
The following message appears
briefly on your display screen:
The following message appears
briefly on your display screen:
Verify that the AC power cable is connected, and that the Cintiq
power switch is turned on.
Verify that the Digital/Analog (DVI/VGA) switch is properly
set. Restart your computer after changing the position of the
switch.
Check the contrast, brightness, and backlight controls. Adjust as
necessary, or open the OSD menu, go to the Reset menu and
select the Recall option.
Your computer may be in a power management mode. Touch the
pen tip to the display screen, move the mouse, or depress any key
on your keyboard.
Verify that the video card is properly installed.
Check the video cable for bent or broken connector pins.
Then properly connect the video cable.
Check that your computer is turned on.
Verify that you are using the video cable that came with Cintiq.
Check that the Cintiq video cable is fully connected.
Check the video cable and any video adaptors for bent or broken
connector pins. Then properly connect the video cable and any
necessary adaptors.
The input signal frequency is incorrectly set or not compatible with
Cintiq. Connect a different display and set the refresh rate (ver-
tical frequency) to some value between 50 and 75 Hz. If your
video card driver supports adjustment of the horizontal fre-
quency, make sure it is set to some value between 31.5 and
61 kHz.
The resolution is set too high (1024 x 768, maximum).
The refresh rate is set too high (75 Hz, maximum).
Set the display properties to detect plug and play monitors.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wacom CintiQ - 15X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wacom CintiQ - 15X in the language / languages: English as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info