596624
68
Zoom out
Zoom in
Previous page
1/95
Next page
Contents
Index
Contents
68
Index
68
TESTING YOUR TABLET
1. Turn on your computer and wait until the system has fully loaded.
2. Check the USB connection. The tablet status LED should glow whenever the tablet is properly
connected and your computer has registered it as a USB device. If not:
Make sure the tablet USB cable is securely connected to an active USB port on your computer.
Check the tablet USB cable for damage.
If you are connecting the tablet to a USB hub (or hub device such as a keyboard with USB ports), be
sure the USB hub is properly connected to your computer and is active.
If the status LED does not illuminate after your computer is on and has finished booting up, your
USB port may be disabled. Verify that you have connected the tablet to an active USB port.
Connect the tablet to a different USB port or try connecting to the USB port on another computer.
3. For wireless operation
, check the tablet connection. The tablet status LED should glow whenever the
tablet is properly connected and your computer has registered it as a USB device. If not:
Verify that the wireless module is on. See battery and wireless connection status
.
Verify that the wireless module and receiver are properly installed. See wireless setup
.
Check the battery power. See battery and wireless connection status
. If the battery charge is low,
connect the USB cable and charge the battery. See charging the battery
.
Switch the wireless module off, and then back on.
Move the tablet closer to the computer. Make sure there are no metal or other high density
obstructions in the line of sight between the tablet and computer.
4. Check touch and pen input:
Check touch input
. Attempt to move the screen cursor by tracking your finger across the tablet
surface. Then tap to select an item. The status LED should brighten when you touch the active area
of the tablet.
If the tablet driver does not load properly, basic touch movement will be recognized but other
actions and gestures will not. If the driver does not properly load, the lower two ExpressKeys only
will function at their default settings of C
LICK (bottom key) and RIGHT CLICK (2nd key up). If gestures
are not recognized and ExpressKeys do not function, install the tablet driver software.
Check pen input
. If the tablet driver does not load properly, pen input will not be available. (If you
have a pen-only tablet model, you will be able to use the pen tip to move the screen cursor and
click. You will also be able to use the pen buttons to C
LICK and RIGHT CLICK, but there will be no
other pen functionality.) Install the tablet driver software. See also testing a pen
.
68


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Wacom Bamboo Create at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Wacom Bamboo Create in the language / languages: English as an attachment in your email.

The manual is 7,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info