66
Test SOS pendant’s signal strength
1. Press MENU on the cordless handset in
idle mode to enter the main menu.
2. Press q or p to choose Set device
and then press SELECT.
3. Press SELECT to select Check signal.
4. Scroll to select PENDANT X (X
represents the device number
assigned to the ringer) and then press
SELECT.
5. While the handset screen displays
Awaiting signal, press CANCEL on the
back of the SOS pendant.
6. When the handset screen displays
Good signal, press SELECT. The testing
is complete.
• If the handset screen displays No
signal, press SELECT, and then
repeat from step 4 to test again.
• If the handset screen displays Weak
signal, press SELECT. Then, move
the Extension ringer closer to the
base, and then adjust the Extension
ringer’s location to improve the
signal. Repeat from step 1 to test
again.
Device monitoring
If there are additional devices registered
to the telephone base, the names of the
registered devices appear in the Devices
menu of the cordless handset.
View device status
You can view the current status of each of
the registered devices and check whether
they are active, inactive, or with low
battery.
1. Press MENU on the cordless handset in
idle mode to enter the main menu.
2. Press q or p to choose Devices and
then press SELECT.
3. Scroll to the desired device and then
press SELECT.
4. Press SELECT to select Status.
• ACTIVE
• INACTIVE
• LOW BATT
View device log
You can view the device log of each of the
registered devices and check the time and
event triggered on each device.
1. Press MENU on the cordless handset in
idle mode to enter the main menu.
2. Press q or p to choose Devices and
then press SELECT.
3. Scroll to the desired device and then
press SELECT.
4. Press q or p to choose Log, and
then press SELECT to view the events
triggered.
