698335

VTech Phones SN5147 Manual

17
Zoom out
Zoom in
Previous page
1/90
Next page
11
Before use
After you install your telephone or power
returns following a power outage, the
cordless handset will prompt you to set the
date and time.
Set date and time
• Make sure you set the date and time
including the year correctly; otherwise the
answering system does not announce the
correct day of the week for your recorded
messages time stamp.
1. Use the dialing keys (0-9) to enter the
month (MM), date (DD) and year (YY).
Then press SELECT.
2. Use the dialing keys (0-9) to enter the
hour (HH) and minute (MM). Then
press any dialing keys (0-9,
*
or #) to
choose between AM and PM.
3. Press SELECT to save.
Voice guide to set Smart call
blocker
After the date and time setting is done
or skipped, the cordless handset then
prompts if you want to set Smart call
blocker. Press SELECT to start the Smart call
blocker setup via voice guide. For more
details, see Voice guide to set Smart call
blocker on page 44. To skip the setup,
press CANCEL on the cordless handset.
Voice guide to set answering
system
After the Smart call blocker setting is done
or skipped, the cordless handset will then
prompt if you want to set up the answering
system. Press SELECT to start the answering
system setup via voice guide. For more
details, see Voice guide to set Answering
system on page 52. To skip the setup,
press CANCEL on the cordless handset.
Check for dial tone
Press TALK. If you hear a dial tone, the
installation is successful.
If you do not hear a dial tone:
• Make sure the installation procedures
described above are properly done.
• It may be a wiring problem. If you have
changed your telephone service to
digital service from a cable company or
a VoIP service provider, the telephone
line may need to be rewired to allow
all existing telephone jacks to work.
Contact your cable/VoIP service
provider for more information.
Operating range
This telephone operates with the
maximum power allowed by the Federal
Communications Commission (FCC). Even
so, this cordless handset and telephone
base can communicate over a certain
distance - which can vary with the locations
of the telephone base and handset, the
weather, and the layout of your home or
office.
When the cordless handset is out of range,
the handset displays Out of range OR no
pwr at base.
If there is a call while the cordless handset
is out of range, it may not ring, or if it
does ring, the call may not connect well
when you press TALK. Move closer to the
telephone base, then press TALK to answer
the call.
If the cordless handset moves out of
range during a telephone conversation,
there may be interference. To improve
reception, move closer to the telephone
base.
… 17 …


Need help? Post your question in this forum.

Forumrules
1

Forum

vtech-phones-sn5147

Reset search

  • People call.. we cannot hear them but they hear us. Submitted on 20-7-2021 at 19:45

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for VTech Phones SN5147 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of VTech Phones SN5147 in the language / languages: English as an attachment in your email.

The manual is 10,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of VTech Phones SN5147

VTech Phones SN5147 Quick start guide - English - 108 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info