Manual VTech Phones NG-S3211 - W (page 23 of 26) (English)

809904

Zoom out

Zoom in

1/26

EN - 23

Appendix

FCC, ACTA and IC regulations

FCC Part 15

This device complies with Part 15 of the FCC

rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful

interference, and

(2) this device must accept any interference

received, including interference that may

cause undesired operation.

This equipment has been tested and found

to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable

protection against harmful interference when

the equipment is operated in a commercial

environment. This equipment generates, uses,

and can radiate radio frequency energy and,

if not installed and used in accordance with

the instruction manual, may cause harmful

interference to radio communications.

Operation of this equipment in a residential

area is likely to cause harmful interference in

which case the user will be required to correct

the interference at the user’s expense.

WARNING: Changes or modiﬁcations to this

equipment not expressly approved by the

party responsible for compliance could void

the user’s authority to operate the equipment.

Privacy of communications may not be ensured

when using this telephone.

RF Radiation Exposure

This VoIP Phone complies with FCC RF radiation

exposure limits set forth for an uncontrolled

environment.

Caution: To maintain compliance with the radio

frequency exposure requirement, the phone

shall be installed and used so that parts of user’s

body other than hands keep a distance of 20 cm

or more.

FCC Part 68 and ACTA

Consumer Information

a. This equipment complies with Part 68 of the

FCC rules and the requirements adopted

by the Administrative Council for Terminal

Attachments (ACTA). On the bottom of this

equipment is a label that contains, among

other information, a product identiﬁer in the

format US:AAAEQ##TXXXX. If requested,

this number must be provided to the

telephone company.

b. An applicable certiﬁcation jacks Universal

Service Order Codes (USOC) for the

equipment is provided (i.e., RJ45C) in the

packaging with each piece of approved

terminal equipment.

c. A plug and jack used to connect this

equipment to the premises wiring and

telephone network must comply with

the applicable FCC Part 68 rules and

requirements adopted by the ACTA. A

compliant LAN cable (RJ45) and modular

plug is provided with this product. An RJ45

jack should normally be used for connecting

to the SIP equipment through the LAN cable.

See installation instructions for details.

d. If this equipment causes harm to the

telephone network, the telephone company

will notify you in advance that temporary

discontinuance of service may be required.

But if advance notice isn‘t practical, the

telephone company will notify the customer

as soon as possible. Also, you will be advised

of your right to ﬁle a complaint with the FCC

if you believe it is necessary.

e. The telephone company may make changes

in its facilities, equipment, operations or

procedures that could affect the operation

of the equipment. If this happens the

telephone company will provide advance

notice in order for you to make necessary

modiﬁcations to maintain uninterrupted

service.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of VTech Phones NG-S3211 - W in the language / languages: English as an attachment in your email.

The manual is 2.14 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

VTech Phones NG-S3211 - W Manual

Product: