809816
27
Zoom out
Zoom in
Previous page
1/28
Next page
52 53
Change the remote access
PIN
Make sure that Remote Access is turned
on and then you can ring your phone
from another tone-dialling phone to
switch the answering machine on or off,
and/or listen to your messages remotely.
You can set your own remote access
code. Default PIN is 0000.
1. Press when the phone is not in
use.
2. Press to select ANS. MACHINE.
3. Press ▼/▲ to scroll to TAM SETTINGS,
and then press to select.
4. Press ▼/▲ to scroll to CHANGE PIN,
and then press to select.
The display shows OLD PIN?----
Default PIN is 0000.
5. Enter your current 4-digit remote
access PIN.
The PIN is masked as ****.
6. Press to enter or to cancel.
If you entered the correct current
remote access PIN, the display
shows NEW PIN?----; - - - - cursor
flashes.
7. Enter your preferred 4-digit new PIN.
The PIN is masked as ****.
The PIN must be 4-digit,
otherwise, it will not proceed to
confirmation page.
8. Re-enter the new PIN in confirm page.
Press to save and confirm.
You hear a confirmation tone.
General product care
Taking care of your telephone
Your cordless telephone contains
sophisticated electronic parts, so it must
be treated with care.
Avoid rough treatment
Place the handset down gently. Save the
original packing materials to protect your
telephone if you ever need to ship it.
Avoid water
Your telephone can be damaged if it gets
wet. Do not use the handset outdoors in
the rain, or handle it with wet hands. Do
not install the telephone base near a sink,
bathtub or shower.
Electrical storms
Electrical storms can sometimes cause
power surges harmful to electronic
equipment. For your own safety, take
caution when using electrical appliances
during storms.
Cleaning your telephone
Your telephone has a durable plastic
casing that should retain its luster for
many years. Clean it only with a dry non-
abrasive cloth. Do not use dampened
cloth or cleaning solvents of any kind.
Storage
When you are not going to use the
telephone for some time, unplug
the adapter(s), and remove the
rechargeable battery from the handset.
Store the telephone base, the handset,
the charger(s) and the adapter(s) in a
cool and dry place.
Frequently asked
questions
Below are the questions most frequently
asked about the cordless telephone.
If you cannot find the answer to your
question, visit our website at
www.vtechphones.eu.
My telephone
does not work
at all.
Make sure the telephone base is installed
properly, and battery is installed and
charged correctly. For optimum daily
performance, return the handset to the
telephone base after use.
The display
shows No line. I
cannot hear the
dial tone.
Disconnect the telephone line cord from
your telephone and connect it to another
telephone. If there is no dial tone on
that other telephone either, then the
telephone line cord may be defective. Try
installing a new telephone line cord.
If changing the telephone line cord does
not help, the wall jack (or the wiring to this
wall jack) may be defective. Contact your
telephone service provider.
You may be using a new cable or VoIP
service, the existing telephone jacks in
your home may no longer work. Contact
your service provider for solutions.
I cannot dial out.
Make sure there is a dial tone before
dialing. It is normal if the handset takes
a second or two to synchronize with the
telephone base before producing a dial
tone. Wait an extra second before dialing.
Eliminate any background noise. Mute
the handset before dialing, or dial from
another room in your home with less
background noise.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for VTech Phones ES 2051 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of VTech Phones ES 2051 in the language / languages: English as an attachment in your email.

The manual is 18.34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info