597266

VTech InnoTab 2S Wi-Fi Manual

32
Zoom out
Zoom in
Previous page
1/44
Next page
29
Cannot connect to Wi-Fi. The Wi-Fi is
disabled.
Press
to enable Wi-Fi.
The firmware of
the InnoTab
®
2S is
not up-to-date or
the tablet has not
been registered
on Learning Lodge
Navigator
®
.
Register your tablet on Learning
Lodge Navigator
®
, and make
sure the firmware is the most
up-to-date version. For the
instructions, please see the
Getting Started With Wi-Fi
section on page 8.
Wi-Fi is enabled,
but there is no Wi-Fi
network available.
There is no Wi-Fi
network in your
location or network
signal is weak.
Move to a location that has an
available Wi-Fi network.
Wi-Fi network is
available, but the
connection failed.
The selected
network is not
configured properly
or authentication is
required.
Make sure the network is
configured properly and there
is no firewall blocking Internet
access. If a password is needed,
make sure the correct password
is entered with the appropriate
uppercase/lowercase letters
indicated.
If your InnoTab
®
2S does not respond to an inserted cartridge, please
carefully try the following:
•Removeallbatteriesandunplugallwiring.
•Useacottonswabdippedinrubbingalcoholoranalcohol-basedwindow
cleaner to gently clean the contact area of the cartridge slot.
•Ifnecessary,dryallthecleancontactareaswithasoft,lint-freecloth.
•Pleasemakesurethatallpartsarecompletelydrybeforerestoringelectricity.
Static electricity may cause the InnoTab
®
2S to malfunction. In some
cases, the game play score stored in the tablet memory may be lost. In
cases where InnoTab
®
2S is malfunctioning due to static electricity, reset
the tablet by removing and reinstalling the batteries, or by unplugging and
repluggingtheACadaptor.Or,ifthestaticelectricitymalfunctionoccurred
duringthedownloadingprocess,disconnecttheUSBcable,deletethe
corrupted file, and reset the tablet as described above. Then reconnect
theUSBcableandrestartthedownloadprocess.
For more information and troubleshooting tips, visit
www.vtechkids.com/tutorials/innotab2
T
E
C
H
N
I
C
A
L
S
U
p
p
O
R
T
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for VTech InnoTab 2S Wi-Fi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of VTech InnoTab 2S Wi-Fi in the language / languages: English as an attachment in your email.

The manual is 3,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info