8
VQ
™
Vector
Vector X Button
Pressing this button during treatment will rotate the stimulation pattern to
the right so that you will feel the stimulation more intensely in the right
side of your treatment area and less in the left side. Pressing and holding
this button will make the stimulation pattern sweep from side to side every
60 seconds.
Pause Button
Press and release this button to instantly stop stimulation. The device
remains on and the timers are paused. Press and release the button a second
time to return to the same point in the therapy program.
LCD Display
The LCD display will keep you informed about your treatment showing you
the following items.
• Upper left corner will indicate the preset you are using
• Upper right corner will indicate the time remaining in your treatment
• Lower left corner will indicate if the vector is being used
• Lower right corner is your output amperage
• In between the rows there are flashing bars to indicate the current
is flowing
• Low battery indicator to the left of the preset display
• Pause indicator to the right of the remaining time display
• Backlighting will illuminate the screen and buttons in order to make it
easier to view in low light situations
Low Battery Indicator
This will flash on when the batteries are nearly depleted, indicating you
have approximately 5-30 minutes of battery life left, depending on your
parameter settings. Try to replace them as soon as possible. When the
batteries are sufficiently depleted, the device automatically shuts itself off.
Controls and Features (cont.)