652499

VQ OrthoCare FastStart IF Manual

8
Zoom out
Zoom in
Previous page
1/20
Next page
Controls and Features
The FastStart
®
IF can be operated on a tabletop by folding out the belt clip and setting on
top of the table. You can also attach the unit to your belt by folding the clip against the
unit and fastening the clip over the top of a belt or pants.
ON/OFF Button
Press the On/Off button when you are ready to begin your therapy session. The FastStart IF
always turns on with 0 intensity. Pressing the On/Off button at any time during the therapy
session will immediately stop stimulation and turn the device off. If you press and hold the
On/Off button you will see your serial # displayed on the screen.
Tab/Field Button
Press this button to highlight preset number or intensity to make changes.
Display Button
Press this button to display each of the parameters for the preset. There are four
screens of information for each preset.
Save Button
Used by your clinician to set up the unit.
Increase Button
Pressing and releasing or pressing and holding this button increases the intensity of
the stimulation. The display will show you in milliamps how high your intensity is
set. The range is from 0 to 50 milliamps in 0.5 milliamp increments.
Decrease Button
Pressing and releasing, or pressing and holding this button decreases the intensity of
the stimulation. Usually when your treatment is over the unit will turn off
automatically. It is not necessary to decrease the intensity to turn the unit off.
Pause Button
Press and release this button to instantly stop stimulation. The device remains on and the
timers are paused. Press and release the button a second time to return to the same point in
the therapy program. Always pause your treatment before connecting or disconnecting
your AC adapter. If your unit is running press the PAUSE button to pause your
treatment before connecting or disconnecting yourAC adapter. Press the PAUSE
button again to resume your treatment.
LCD Display
The LCD display will keep you informed about your treatment showing you
the following items.
·
Left corner will indicate the preset you are using.
·
Upper right corner will indicate the time remaining in your treatment.
·
Lower left corner will indicate the rate.
6
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for VQ OrthoCare FastStart IF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of VQ OrthoCare FastStart IF in the language / languages: English as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info