659081
10
Zoom out
Zoom in
Previous page
1/24
Next page
10
Programming (coding) the transmitter with the receiver
Each transmitter has its own operational code. The programming of the transmitter with the receiver
enables the two units to work together. This operation will help you to program the receiver to work
with a new transmitter or to program a new receiver to work with your existing transmitter. Receiver can
be reprogrammed indenitely, either with the same transmitter or a new VOSS.miniPET transmitter. It is
possible to program an unlimited number of receivers to one transmitter.
Switch on the transmitter. The receiver must be switched OFF.
Select dog 1 using the button on the transmitter.
Positon the lower part of the transmitter where the magnet is located against the white half circle
near the LED indicator on the receiver (see the picture on the page 9), hold for 5 second, the recei-
ver LED indicator will ash four times in green and red simultaneously indicating the receiver is in
programming mode.
Remove your transmitter and press the tone signal button on the transmitter. A beep sound is
emitted from the receiver on the collar; the receiver is then synchronized with the transmitter.
Select dog 2 using the button on the transmitter and proceed with the programming in the
same way as above (applicable when programming additional receiver for second dog, receiver
must be purchased separately).
IMPORTANT: Before the programming make sure no other person is using his VOSS.miniPET
or other products from the VNT electronics range close by: your receiver could accidentally
record the code of his transmitter. In case of such an occurrence, simply repeat the
programming process.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Voss miniPet DOG C900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Voss miniPet DOG C900 in the language / languages: English as an attachment in your email.

The manual is 2,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Voss miniPet DOG C900

Voss miniPet DOG C900 User Manual - German - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info