766099
38
Zoom out
Zoom in
Previous page
1/156
Next page
38 41405 | 02 | 2021 | V3
10. GENERAL OPERATION
The Impuls DUO RF models work similarly to the Impuls DUO, but additional functions have
been added for communication between the energiser and the remote control.
If the energiser is completely switched o and no lights are seen, hardly any energy is
consumed. However, in this state the energiser cannot interact with the remote control.
RF models have a dierent switched o state in which the energiser is still ready to receive
the signal from the remote control. In this state, the control LED ashes blue every three
seconds. If it ashes red, the battery charge is low. Use the main screen to control the
selected energiser.
The selection between the devices is made using the arrow keys. Use the display to check
the fence voltage (kV). If you want to display the supplied voltage (V) instead of the fence
voltage, press the „data selection“ button (16).
At the top right of the remote you will nd the energiser output button (10). With this
button you can adjust the energiser output: 100% or 50%. Your selection will be shown on
the display (8).
There are two power buttons on the remote. Hold down the red power button (15) and
turn the remote control on and o. Press and hold the energiser power button (17) to turn
the energiser on or o.
11. CALIBRATION MODE
Calibration mode assigns the energiser to a remote control.
Turn the energiser ON, then OFF and then hold down the ON/OFF button on the energiser
for at least ve seconds. In the calibration mode, the control LED ashes blue rapidly.
Press and hold the calibration button on the remote control (13) until „P“ appears on the
display.
Use the arrow keys to assign the energiser a desired identication number.
Place the remote control near the energiser, within 20 cm or less, and press the
calibration button (13).
If the calibration fails, please try again.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Voss Impuls duo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Voss Impuls duo in the language / languages: English, German, Dutch, French, Italian, Polish, Swedish, Spanish as an attachment in your email.

The manual is 7,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Voss Impuls duo

Voss Impuls duo User Manual - English - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info