766099
19
Zoom out
Zoom in
Previous page
1/25
Next page
DE EN FR IT NL SE ES
Where there are two separate electric fences, each supplied by a separate energiser,
the distance between the wires of the two fences must be at least 2.5 m. If this gap
between the fences must be closed o, then this must be done using non-conducting
materials or an insulated metal barrier. Barbed wire or sharp-edged wire may not be
electried by an energiser.
Observe the manufacturer’s recommendations for grounding the energiser.
A distance of at least 10 m must be kept between the grounding electrode for the ener-
giser and any other components connected to grounding systems (such as the ground
connections for power supply systems or telecommunications systems). Connecting
cables that run through buildings must be eectively isolated from grounded parts of
the building. This can be achieved using insulated high-voltage cables.
If connection cables and wires that are part of the electric fence must run near to
high-voltage lines, then they may not be installed more than 3 m above the ground.
This height applies to each side of a right-angled projection from the outer conductor
of the high-voltage cable on the area for a distance of
• 2 m for high-voltage lines that operate at a
rated voltage of up to 1000 V;
• 15 m for high-voltage lines that operate at a rated voltage over 1000 V.
Electric fences intended for scaring o birds, for keeping pets or training animals, e.g.
cows (cow trainer), should only be supplied by a low power energiser (which still has a
sucient and secure eect). Where an electric fence is intended to prevent birds from
nesting on buildings, no wire of the electric fence may be grounded if the fence wires
are not connected to metal parts.
If a wire is connected to a metal part (such as gutter) or a metal structure in the build-
ing, then this metal part must be grounded. A warning sign must be attached at all
points where people are able to access the conductors.
Where an electric fence crosses a public footpath, a non-electried gate or stile must
be present. Each of these stiles must be tted with warning signs indicating that the
fence is an electric fence. Each part of an electric fence that runs along public streets
or other public rights of way must have warning signs securely attached to the fence
posts or wires at regular intervals. Connecting wires that run below the ground must
be placed inside protective insulated pipes or insulated high-voltage cables must be
used. It is important to ensure that connecting cables cannot be damaged by external
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Voss Impuls duo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Voss Impuls duo in the language / languages: English as an attachment in your email.

The manual is 2,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Voss Impuls duo

Voss Impuls duo User Manual - English, German, Dutch, French, Italian, Polish, Swedish, Spanish - 156 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info