766099
9
Zoom out
Zoom in
Previous page
1/25
Next page
DE EN FR IT NL SE ES
of the other terminal. Just before the tip of the screwdriver touches the second terminal,
you should see a small, harmless spark.
If the control LED (3) or the LED bar (4) do not light up and/or there is no spark, then
check the power supply  rst: connection to mains or battery voltage. If there is no fault
here, the device should be checked by a specialist.
NOTE: A normal electrical voltmeter is not suitable for checking the voltage! Special
fence testers exist for this purpose!
If your energiser is working properly, turn it o , unplug it, then proceed to connect your
fence system. Connect the ground connection (6, ground symbol, black terminal nut)
with your grounding post. We recommend using cables with M8 connection eyelets.
The grounding posts should be at least 75 cm long. The better the grounding, the more
e ective the electrical pulse will be. Connect the fence connection (7, lightning symbol,
red connection nut) to the fence using a fence connection cable. When assembling the
ground and fence connections, make sure to tighten the connection nuts by hand as
much as possible.
NOTE: To avoid lightning damage, we recommend installing lightning protection
equipment (B), item number 48110.
4. GROUNDING:
It is extremely important that your electric fence is properly grounded! This
is essential for the proper functioning of your energiser and to ensure
maximum performance. The grounding should be installed in a damp area
with vegetation. Use galvanised metal posts for the grounding posts. They
must have a minimum length of 75 cm (such as item no. 44219). Dry soil and
long fences require additional grounding posts at intervals of about 2–3 m to
improve the connection with the ground.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Voss Impuls duo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Voss Impuls duo in the language / languages: English as an attachment in your email.

The manual is 2,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Voss Impuls duo

Voss Impuls duo User Manual - English, German, Dutch, French, Italian, Polish, Swedish, Spanish - 156 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info