540500

Vortex DIAMONDBACK HP Riflescope Manual

6
Zoom out
Zoom in
Previous page
1/9
Next page
11 10
RIFLESCOPE
diamondback
Visually bore-sighting a rifle.
Bore Sighting
Initial bore sighting of the riflescope will save time and money at the range.
This can be done in a number of ways. A mechanical or laser bore sighter
can be used according to the manufacturer’s instructions. On some rifles,
bore sighting can be done by removing the bolt and sighting through the
barrel.
• Place the rifle solidly on a rest and remove the bolt.
• Sight through the bore at a target approximately 100 yards away.
• Move the rifle and rest until the target is visually centered inside the
barrel.
• With the target centered in the bore, make windage and elevation
adjustments until the reticle crosshair is also centered over the target.
To visually bore sight a rifle:
Final Range Sight-In
After the riflescope has been bore-sighted, final sight-in should be done
at the range using the exact ammunition expected to be used while
shooting. Sight in and zero the riflescope at the preferred distance. 100
yards is the most common zero distance, although a 200 yard zero may
be preferred for long range applications.
Note: Be sure the reticle is in focus (see Reticle Focus on page 5) and
set the side focus adjustment (if present) to match the distance being
used for sight-in:
This procedure can be repeated as many times as necessary to achieve a
perfect zero.
• Following all safe shooting practices, fire a three-shot group as
precisely as possible.
• Next, adjust the reticle to match the approximate center of the shot
group (see Windage and Elevation Adjustment on page 6).
Note: If the rifle is very solidly mounted and cannot be moved, simply
look through the scope and adjust the reticle until it is centered on the
fired group.
• Carefully fire another three-shot group and see if the bullet group is
centered on the bullseye.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vortex DIAMONDBACK HP Riflescope at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vortex DIAMONDBACK HP Riflescope in the language / languages: English as an attachment in your email.

The manual is 4,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info