540502

Vortex CROSSFIRE II Riflescope Manual

8
Zoom out
Zoom in
Previous page
1/9
Next page
15
14
RIFLESCOPE
II
tRoubleshooting
Many times, problems thought to be with the scope are actually mount
problems. Be sure that correct base and rings are being used in the correct
orientation, and that the base screws and rings are tight. Insufficient windage
or elevation adjustment range may indicate problems with rings, base, base
alignment, base mount holes drilled in the rifle’s receiver, or barrel/receiver
alignment.
Check for Correct Base and Ring Alignment
• Roughly center the reticle by adjusting both windage and elevation
turrets to the mid point of their travel ranges.
• Attach bore sighter, or remove bolt and visually boresight rifle.
• Look through the scope. If the reticle appears way off center on the
boresighter image or when compared to the visually centered target when
looking through rifle’s bore, there may be a problem with the bases or rings
being used. Confirm that correct base and rings are being used—and in the
proper orientation.
Tips for Solving Bullet Grouping Problems
• Maintain a good shooting technique and use a solid rest.
• Check that all screws on rifle’s action are properly tightened.
• Be sure rifle barrel and action are clean and free of excessive oil or
copper fouling.
• Check that rings are correctly torqued per the manufacturer’s instructions.
• Some rifles and ammunition don’t work well together—try
different ammunition and see if accuracy improves.
Sighting-in Problems
the Vip WARRAnty
We build optics based on our commitment to your absolute satisfaction.
That’s why Vortex products are unconditionally guaranteed and we make
this Very Important Promise to you—a Very Important Person.
Rest assured that in the event your Crossfire II becomes damaged or
defective, Vortex Optics will repair or replace
the riflescope at no charge to you. Call
Vortex Optics at 800-426-0048 for prompt,
professional, and friendly service.
Vortex Optics
2120 West Greenview Drive
Middleton, WI 53562
service@vortexoptics.com
Visit www.vortexoptics.com for more information. Canadian customers
may visit www.vortexcanada.net for customer service information.
Note: The VIP warranty does not cover theft, loss, or deliberate damage
to the product.
Lifetime Warranty
Unlimited
Unconditional
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vortex CROSSFIRE II Riflescope at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vortex CROSSFIRE II Riflescope in the language / languages: English as an attachment in your email.

The manual is 3,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info