774147
10
Zoom out
Zoom in
Previous page
1/13
Next page
10 English
WARNING: To reduce the risk of electrical shock and injury to persons,
unplug the circulator before removing grille.
Tip: To prevent scratching, gently cover the tip of a at screwdriver with a
soft cloth.
Place at screwdriver against the angled section of the grille support tab,
(as shown) and press outward to allow the grille wire to be released from
the support tab. Repeat on second and third grille support tab. To reinstall,
relocate grille wire ends into the support tabs, use the at screwdriver to ex
back the support tabs to allow grille to snap into place. Be sure all three grille
wire ends are engaged.
GRILLE REMOVAL
FOR ALL VFAN MODELS Screwdriver required. BLADE REMOVAL
FOR VFANJR MODELS Screwdriver required.
WARNING: To reduce the risk of electrical shock and injury to persons,
unplug the circulator before removing blade.
It is possible to remove the blade should something accidentally get wrapped
around the motor shaft.
VFAN JR: Remove the Blade Cap by wedging
a cloth wrapped screwdriver under the Blade
Cap. Next, remove the Nut by rotating clock-
wise and then remove the Washer. Pull the fan
blade straight out from the shaft (Fig. 1). When
replacing, the Blade can only go on the shaft
one way. Push the Blade all the way on the shaft
until it bottoms out. Do not use a hammer as
this could result in bearing damage. Replace
the Washer, the Nut, and then just press the
Blade Cap in place to secure.
VFAN, VFAN SR, VFAN SR Pedestal:
Unscrew the Blade Cap clockwise (Fig.
2). Then pull the blade straight out
from the shaft (Fig. 3). When replac-
ing, the blade can only go on the shaft
one way. Push the blade all the way on
the shaft until it bottoms out. Do not
use a hammer as this could result in
bearing damage. Replace the Blade Cap.
Fig. 2 Fig. 3
Blade Cap
Fig. 1
Blade Cap Nut Washer
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vornado VFANSR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vornado VFANSR in the language / languages: English as an attachment in your email.

The manual is 2.28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info