774135
13
Zoom out
Zoom in
Previous page
1/16
Next page
11
English
CLEANING
Because your tower moves a substantial
amount of air, it will need regular cleaning.
Never clean the product in any manner other
than instructed in this owner's guide.
WARNING: To reduce the risk of
electrical shock and injury to persons,
unplug the tower before removing grille.
REGULAR CLEANING
1. Power off and unplug tower before
cleaning.
2. Use the brush attachment on your
household vacuum cleaner to vacuum
any accumulated dust off the tower.
3. Wipe down the entire tower with a
soft cloth.
Note: Do not use gasoline, thinners, solvents
or other chemicals for cleaning. The motor
is permanently lubricated and requires
no oiling.
INTENSIVE CLEANING
AIR INLET GRILLE REMOVAL
Screwdriver required.
You may remove the Air Inlet Grille to
vacuum any dust off the fan blade by
following these instructions:
1. Power off and unplug tower before
cleaning.
2. Use a Phillips screwdriver to loosen the 4
screws located along front edge of grille.
3. Rotate front edge of grille backward until
grille is removed.
4. Use the brush attachment on vacuum
cleaner to remove any accumulated dust
off the fan blade.
5. Replace Air Inlet Grille and
tighten screws.
Screws
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vornado NGT42DC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vornado NGT42DC in the language / languages: English as an attachment in your email.

The manual is 2.89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info