774133
7
Zoom out
Zoom in
Previous page
1/79
Next page
13
English
12 English
REMOTE CONTROL
Screwdriver required.
1. For battery replacement, the remote
requires one coin style 3V CR2032 battery.
Always use the correct size and grade of
battery for this product.
2. To replace battery, open battery door on
the back side of the remote control (you
will need to loosen the small screw on
door using a #1 Phillips screwdriver). If
necessary, clean the battery contacts and
also those of the device prior to battery
installation. Remove any plastic protection
from the battery and place it in the
remote with the + side facing out. Ensure
the battery is installed correctly with
regard to polarity. Replace the battery
door and screw.
Note: Remove battery from the remote
control when not in use for an extended
period of time and always remove dead
battery immediately and replace with fresh.
Do not store dead battery in remote.
POWER
TIMER
SPEED/TIMER
ADJUSTMENT -/+
The remote control functions are the same as
the control panel on the tower.
The remote requires a line-of-sight path to
allow for the signal to be received by the
tower. Position the tower so the receiver lens
(inside the Vornado “V” logo) is visible from
the remote control.
Your tower circulator remote includes (1) coin style 3V CR2032 battery. Battery comes pre-installed. Remove battery pull tab before first use.
CLEANING
INTENSIVE CLEANING
AIR INLET GRILL REMOVAL
Screwdriver required.
You may remove the Air Inlet Grill to vacuum
any dust off the fan blade by following these
instructions:
1. Unplug tower before cleaning.
2. Use a Phillips screwdriver to loosen the 4
screws located along front edge of grill.
3. Rotate front edge of grill backward until
grill is removed.
4. Use the brush attachment on vacuum
cleaner to remove any accumulated dust
off the fan blade.
5. Replace Air Inlet Grill and tighten screws.
Screws
Because your tower moves a substantial amount of air,
it will need regular cleaning. Never clean the product
in any manner other than instructed in this owner's
guide. If service is required, refer to back page for your
Authorized Service Center.
WARNING
Observe the following safety information to avoid
risks and property damage.
To reduce the risk of electrical shock and injury to
persons, unplug the tower before cleaning.
REGULAR CLEANING
1. Unplug tower before cleaning.
2. Use the brush attachment on your household
vacuum cleaner to vacuum any accumulated dust
off the tower.
3. Wipe down the entire tower with a soft cloth.
Note: Do not use gasoline, thinners, solvents or other
chemicals for cleaning. The motor is permanently
lubricated and requires no oiling.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vornado NGT425 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vornado NGT425 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 7.71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Vornado NGT425

Vornado NGT425 User Manual - English - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info