774116
12
Zoom out
Zoom in
Previous page
1/16
Next page
12 English
Blade Removal
It is possible to remove the blade should something
accidentally get wrapped around the motor shaft.
First, remove the nut from the shaft (only necessary on
V102, 133, 270, 573, 533, 633, 673, 679, 743 and 753
models.) Turn the nut clockwise to loosen. Pull the
blade straight out from the shaft. When replacing, the
blade can only go on the shaft one way. Be certain
the flat side of the shaft aligns directly with the cor-
responding flat side on the blade’s socket. Push the
blade all the way on the shaft until it bottoms out. Do
not use a hammer as this could result in bearing dam-
age. Reinstall nut on applicable models.
To clean motor cap and inlet ribs: Use a com-
mon household vacuum. Do not use water to
clean these parts of the Air Circulator.
To clean grill: Remove grill (See GRILL RE-
MOVAL instructions) and dust or wash with a
mild dishwashing soap. Do not place grill in the
dishwasher. The excessive heat can distort the
plastic.
To clean blade: Wipe with a damp cloth. If your
Air Circulator is used in a greasy environment,
such as a kitchen, mild soap or a common
household cleaner may be necessary. Do not
use solvents.
To clean base: Wipe with a damp cloth.
Because your Air Circulator moves a substantial amount of air, it will need
regular cleaning. To avoid risk of fire, electrical shock, or injury to persons,
unplug the unit before any cleaning activity.
The motor is permanently lubricated and requires no oiling.
Cleaning and Maintenance
²
Remove the Nut
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vornado 510 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vornado 510 in the language / languages: English as an attachment in your email.

The manual is 5.67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info