774065
10
Zoom out
Zoom in
Previous page
1/14
Next page
10 English
The remote control comes with a 3 Volt lithium
coin cell battery (CR2032). To install, remove
the battery cover on the bottom of the remote
control. If necessary, clean the battery contacts
and also those of the device prior to battery
installation. Remove any plastic protection from
the battery and place it in the remote with the +
side facing out. Ensure the batteries are installed
correctly with regard to polarity. Then reposition
the cover onto the bottom of the remote. If
your remote does not work, please try replacing
with a new 3 Volt CR2032 battery, taking care to always use the correct size and grade of
battery for this product.
HOW TO USE
FAN SPEED (A) The fan speed can be adjusted by pressing the SPEED button. Press
the button to switch between the unit’s speed settings. Lights on the unit’s control panel
indicate the selected speed setting.
POWER (B) The unit powers ON and OFF by pressing the POWER button. Lights on the
unit’s control panel indicate the power is ON.
TIMER (C) The unit has an automatic timer to turn the unit OFF at intervals of 1, 2, 4 or 8
hours. To set the timer, turn the unit on and select desired speed. Press the timer button
until the desired run time light is illuminated. The unit will continue to run until that
amount of time has expired.
REMOTE CONTROL This unit comes with a remote control. The remote control functions
are the same as the control panel on the unit. The remote requires a line-of-sight path
to allow for the signal to be received by the unit. Position the unit so the receiver lens
(located above the Vornado logo) is visible from the remote control. The remote control
can be stored with the Tower Circulator using the magnetic bowl-shaped cradle located
on the top of the product.
A
B
C
REMOTE BATTERY
1. For battery replacement, the remote requires one coin style 3V CR2032 battery. Always
use the correct size and grade of battery for this product.
2. To replace battery, open battery door on the back side of the remote control (you will
need to loosen the small screw on door using a #1 Phillips screwdriver). If necessary,
clean the battery contacts and also those of the device prior to battery installation.
Remove any plastic protection from the battery and place it in the remote with the +
side facing out. Ensure the battery is installed correctly with regard to polarity. Replace
the battery door and screw.
Note: Remove battery from the remote control when not in use for an extended period
of time and always remove dead battery immediately and replace with fresh. Do not store
dead battery in remote.
WARNING: This product contains a button battery. If swallowed, it could cause
severe injury or death in just 2 hours. Seek medical attention immediately.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vornado 173 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vornado 173 in the language / languages: English as an attachment in your email.

The manual is 0.53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info