764133

Vonroc WB501XX Manual

6
Zoom out
Zoom in
Previous page
1/24
Next page
6
EN
WWW.VONROC.COM
DESCRIPTION
The numbers in the following text refer to the pictu-
res on pages 2-4.
1. Screw
2. Bolt, nut, washer M6
3. Bolt, nut, washer M8
4. Wrench
5. Plastic foot
6. Bench clamp
7. Slide base
8. Crossbar
9. Table
10. Leg frame
3. ASSEMBLY
Fig. A
• Lay the Table tops (9) down with the screw
holes facing up.
Fig. B
• Fasten both Slide bases (7) onto the Table tops
(9) using the screws (1).
• Make sure the screws are tightened securely,
without overtightening.
Fig. C
• Connect the Leg frames (10) to the Slide bases
(7) by using the Bolt, nut, washer M8 (3).
If you prefer, you can do this while keeping the
workbench turned upside down.
•
Do not overtighten the Bolts (3), as this will
prevent the workbench from folding and unfolding
easily.
Fig. D
• Place the Crossbars (8) onto the Leg frames
(10). Fasten by using the Bolt, nut, washer M6
(2). If you prefer, you can do this while keeping
the workbench turned upside down.
• Make sure the screws are tightened securely,
without overtightening.
Fig. E
• Attach the Plastic feet (5) to the legs.
• Note: The plastic feet are not symmetrical. The
‘highest’ part should be facing the outer corner
of the leg.
Fig. F
• Insert the Bench clamps (6) into one of the
holes of the Table tops (9).
4. OPERATION
Fig. G
To clamp a workpiece in the vice jaws, turn the
hand cranks in clockwise direction. To unclamp a
workpiece in the vice jaws, turn the hand cranks
anticlockwise.
Fig. H
When unfolding the workbench, make sure to push
the folding braces downwards.
To fold the workbench, first use the hand cranks
to fully clamp the vice jaws. Then push the folding
braces in upwards direction as shown in the figure
and fold the workbench. If this is difficult to do,
slightly loosen the screws shown in figure C.
5. MAINTENANCE
The workbench is designed to function
faultlessly for a long period and with a
minimum of maintenance. Extend its
lifespan by regularly cleaning the machine
and treating it correctly.
Cleaning
Regularly clean the workbench, preferably after
each use. Clean with a suitable proprietary house-
hold cleaner and a soft dry cloth. Do not submerge
your workbench in water or any liquid for any rea-
son. Do not use solvents (petrol, alcohol, ammonia,
etc.) as they will damage the plastic parts.
Storage
Store your workbench indoors in a dry environment
away from contaminants. Only store the workbench
when it is dry. Do not subject your workbench to
humid or damp environments, these can damage
the workbench. Store out of reach of children. Store
flat or hang from the wall.
Maintenance
Never use a damaged or broken clamping work-
bench. Temporary repairs are not permitted. Check
the plastic feet of the workbench before and after
use of the workbench. Do not use the workbench
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vonroc WB501XX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc WB501XX in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info