819195
9
Zoom out
Zoom in
Previous page
1/108
Next page
EN
9
WWW.VONROC.COM
4. Plug the charger plug into an electrical outlet
and wait for a while. The LED indicators on the
charger (25) will lighten up and show the char-
ger status.
The charger has 2 LED indicators (25) which indi-
cate the status of the charging process:
Red LED Status Green LED status Charger status
Off Off No power
Off On
Standby mode:
- No battery is
inserted or,
- Battery inserted
but charging has
finished
On Off Battery charging in
progress
Fully charging the 2Ah battery may take up to
60 minutes.
Fully charging the 4Ah battery may take up to
120 minutes.
After the battery is fully charged remove the char-
ger plug from the outlet and remove the battery
from the charger.
When the machine is not being used over a
longer period of time it is best to store the
battery in charged condition.
Assembly of the filter (Fig. E - G)
1. Remove the top section (7) of the container (8)
as shown in Fig. E.
2. Assemble the filter. Ensure to mount the correct
filter, depending on the application:
For dry vacuum cleaning, carefully slide
the HEPA filter (14) over the filter cage (15)
making sure the entire cage (15) is covered
as shown in Fig. F1.
For wet vacuum cleaning, carefully slide
the foam filter (13) over the filter cage (15)
making sure the entire cage (15) is covered
as shown in Fig. F2.
3. Place the top section (7) on the container (8) as
shown in Fig. E.
Connecting the hose (Fig. D1, D2).
For vacuuming (Fig. D1), connect the suction
hose (12) to the vacuum port (10).
For blowing (Fig. D2), connect the suction hose
(12) to the blowing port (9).
Connect the desired nozzle.
Triangular nozzle (18)
The triangular nozzle is designed for domestic wet
and dry vacuuming in, for example, the house, work
room, or garage.
Crevice nozzle (19)
The crevice nozzle is designed for domestic wet
and dry vacuuming, edges and other areas that are
difficult to access.
Car vacuum tool (20)
The brush is designed to vacuuming solids from
small areas. For example from car seats.
Power tool adapter (21)
Adapter for connecting suction hose with a power
tool.
4. OPERATION
If the vacuum cleaner accidentally tips over,
the shut-off float (16) mechanism may
cover the motor vacuum port and stop the
suction. If this happens, simply stand the
cleaner upright and turn it off until the float
(16) returns to its normal position.
Do not vacuum without a filter!
Switching the machine on/off
Press the power switch (1) into the “ON/I” posi-
tion to start your vacuum cleaner.
Press the power switch (1) into the “OFF/0”
position to switch off your vacuum cleaner.
Dry vacuuming (Fig. D1, G)
Clean the HEPA filter (14) regularly to
maintain the suction power.
To avoid the HEPA filter (14) becoming
clogged, we recommend the additional use
of a dust collection bag (17).
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vonroc VC508DC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc VC508DC in the language / languages: All languages as an attachment in your email.

The manual is 14.21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info