778561
7
Zoom out
Zoom in
Previous page
1/68
Next page
EN
7
WWW.VONROC.COM
TECHNICAL SPECIFICATIONS
Model No. VC506AC
Mains voltage 220-240V~
Mains frequency 50-60 Hz
Power input 1.400W
Cable length 6m
Protection category IPX4
Suction force 19 kPA, 1.8 m/min
Container capacity approx. 20 L
Useful volume dry approx. 15 L
Useful volume wet approx. 12L
Filter - dry HEPA filter
Filter - wet Foam filter
Hose system Ø32mm
Diameter intake port (29 Fig. D) Ø52mm
Recommended dust bag VC805AA / VC809AA
Weight (incl. all accessories)
approx. 6kg
DESCRIPTION
The numbers in the text refer to the diagrams on
pages 2-4.
1. On/Off switch
2. Carrying handle
3. Blowing port
4. Power cord storage
5. Blow function adapter
6. Top section
7. Locking clamp
8. Container
9. Base
10. Float
11. Castor wheels
12. Drainage outlet
13. Drainage outlet cap
14. Vacuum port
15. Filter cage
16. Nozzles storage
17. Hose
18. Handle adapter
19. Removable handle
20. Suction tubes
21. Wet and dry floor nozzle
22. Round brush nozzle
23. Crevice nozzle
24. Car vacuum tool
25. Power tool adapter
26. Dust collection bag
27. HEPA filter
28. Foam filter
29. Intake port
3. ASSEMBLY
Before assembly, always switch off the
machine and remove the mains plug from
the mains.
1. Press the container (8) on the base (9) as
shown in Fig. B. Make sure the base (9) is
securely fastened.
2. Fit the filter (27, 28). Ensure to mount the cor-
rect filter, depending on the application:
For dry vacuum cleaning, carefully slide
the HEPA filter (27) over the filter cage (15)
making sure the entire cage (15) is covered
as shown in Fig. C-1.
For wet vacuum cleaning, carefully slide
the foam filter (28) over the filter cage (15)
making sure the entire cage (15) is covered
as shown in Fig. C-2.
3. Place the top section (6) on the container (8).
4. Connect the suction hose (17).
For vacuuming (Fig. E), connect the suction
hose (17) to the vacuum port (14).
For blowing (Fig. F, G), connect the suction
hose (17) to the blowing port (3).
5. Connect the handle (19) to the handle adapter
(18). One or more suction tubes (20) can be fit
to the handle (19) to extend it (fig. A).
6.
Connect the desired nozzle to the handle adapter
(18), handle(19) or suction tubes (20).
Wet and dry floor nozzle (21)
The floor nozzle is designed for domestic wet and
dry vacuuming in, for example, the house, work
room, or garage.
Round brush nozzle (22)
The brush is designed to vacuuming solids from
small areas.
Crevice nozzle (23)
The crevice nozzle is designed for domestic wet
and dry vacuuming, edges and other areas that are
difficult to access.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vonroc VC506AC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc VC506AC in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish as an attachment in your email.

The manual is 8.46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info