764109

Vonroc S-VC503DC Manual

8
Zoom out
Zoom in
Previous page
1/44
Next page
8
EN
WWW.VONROC.COM
When the machine is not being used over a
longer period of time it is best to store the
battery in charged condition.
Assembly of the nozzles (Fig. D)
Either assembly the nozzles (9, 10 or 12) directly to
the suction opening (13) of the machine or use the
extension tube (8).
Floor nozzle (12)
The floor nozzle is designed for domestic dry
vacuuming in, for example, the house, workroom,
or car.
Joint nozzle (10)
The joint nozzle is designed for domestic dry
vacuuming, edges and other areas that are difficult
to access.
Cushion nozzle (9)
The cushion nozzle is designed for domestic dry
vacuuming, for example cushion of sofa’s or textile
furniture.
Accessories holder for storage (11)
Put the vacuum cleaner accessories in the provided
holder on the vacuum cleaner.
4. OPERATION
Note: Regular emptying of the dust cup and
cleaning of the filter assembly ensures optimal
vacuum capacity.
Switching the machine on/off (Fig. A)
• To switch on the vacuum cleaner, move the On/
Off switch (2) forwards (direction ON).
• To switch off the vacuum cleaner, move the On/
Off switch (2) backwards (direction OFF).
5. MAINTENANCE
Before cleaning and maintenance, always
switch off the machine and remove the
battery pack from the machine.
Clean the machine casings regularly with a soft
cloth, preferably after each use. Make sure that
the ventilation openings are free of dust and
dirt. Remove very persistent dirt using a soft
cloth moistened with soapsuds. Do not use any
solvents such as gasoline, alcohol, ammonia, etc.
Chemicals such as these will damage the synthetic
components.
Cleaning the Dust Cup (Fig. E1, E2)
To maintain the optimum performance of the vacuum
cleaner, clean the dust cup (7) after each use.
• Press release button (2) and remove the dust
cup (7) from the motor housing (6).
• Remove the filter assembly (14) from the dust
cup.
• Shake/tap out the dust cup (7) over a suitable
waste bin.
If required, clean the dust cup with a moist cloth.
If required, clean the filter assembly (see
“Cleaning the Filter Assembly”).
• Reinsert the filter assembly (14) into the dust
cup (7).
Afterwards, hang the dust cup at the bottom into
the motor housing, apply light pressure until the
dust cup can be heard to engage.
Cleaning the Filter Assembly (Fig. F1, F2)
• Press release button (2) and remove the dust
cup (7) from the motor housing (6).
• Remove the filter assembly (14) from the dust
cup.
• Remove the filter cover part 1 (15) from the
filter seal (16).
• Remove the filter cover part 2 (22), take out the
filter (17) out of filter cover part 1 (15).
If necessary, you can wet clean the filter (17):
Clean it under running water without any
cleaning detergent, squeeze out the filter (17)
and allow the filter to dry well in order to avoid
the formation of mould.
• Assembly is carried out in reverse order.
MALFUNCTIONS
In the case of insufficient vacuuming performance,
check the following:
1. Is the dust cup (7) full?
• See “Cleaning the Dust Cup”.
2. Is the fabric filter (17) clogged with dust?
• See “Cleaning the Filter Assembly”.
3. Is the capacity of the battery pack too low?
• See “Checking the battery charging status”.
Regular emptying of the dust cup (7) and cleaning
of the filter assembly (14) ensures optimal vacuum
capacity.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vonroc S-VC503DC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc S-VC503DC in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 3,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info