Manual Vonroc S-OS503DC (page 9 of 56) (English, German, Dutch, French, Italian, Polish, Spanish)

764076

Zoom out

Zoom in

1/56

WWW.VONROC.COM

Mounting and removing the sanding paper (Fig. B)

• Hold the machine on its side or upside down.

• Mount sanding paper (9) with the required grain

size onto the sanding pad (4). Make sure that the

perforation in the sanding paper (9) corresponds

with the perforation on the sanding pad (4).

• To remove the sanding paper (9), simply pull the

sanding paper from the sanding pad (4).

Note: Use coarse sanding paper for sanding rough,

uneven surfaces. Use medium sanding paper for

removing the remaining scratches from the coarse

sanding paper. Use ﬁne sanding paper for ﬁnishing

surfaces.

4. OPERATION

Switching on and off (Fig. A)

• To switch on the machine, press the on/off

switch (1) into position I.

• To switch off the machine, press the on/off

switch (1) into position 0.

Setting the speed (Fig. A)

The speed adjustment wheel (3) is used for setting

the speed. The speed adjustment wheel can be

set to 6 positions. The ideal speed depends on the

required grain size and on the material to be worked.

Hints for optimum use

• Clamp the workpiece.

• Firmly hold the machine with both hands.

• Switch on the machine.

• Place the sanding pad with sanding paper on

the workpiece.

• Slowly move the machine over the workpiece,

ﬁrmly pressing the sanding pad against the

workpiece.

• Do not apply too much pressure on the machi-

ne. Let the machine do the work.

• Switch off the machine and wait for the ma-

chine to come to a complete standstill before

putting the machine down.

5. MAINTENANCE

Before cleaning and maintenance, always

switch off the machine and remove the

battery pack from the machine.

Clean the machine casings regularly with a soft

cloth, preferably after each use. Make sure that the

ventilation openings are free of dust and dirt. Re-

move very persistent dirt using a soft cloth moiste-

ned with soapsuds. Do not use any solvents such

as gasoline, alcohol, ammonia, etc. Chemicals such

as these will damage the synthetic components.

ENVIRONMENT

Faulty and/or discarded electrical or

electronic apparatus have to be collected at

the appropriate recycling locations.

Only for EC countries

Do not dispose of power tools into domestic waste.

According to the European Guideline 2012/19/EC

for Waste Electrical and Electronic Equipment and its

implementation into national right, power tools that

are no longer usable must be collected separately

and disposed of in an environmentally friendly way.

WARRANTY

VONROC products are developed to the highest

quality standards and are guaranteed free of defects

in both materials and workmanship for the period

lawfully stipulated starting from the date of original

purchase. Should the product develop any failure

during this period due to defective material and/or

workmanship then contact VONROC directly.

The following circumstances are excluded from this

guarantee:

• Repairs and or alterations have been made

or attempted to the machine by unauthorized

service centers;

• Normal wear and tear;

• The tool has been abused, misused or

improperly maintained;

• Non-original spare parts have been used.

This constitutes the sole warranty made by compa-

ny either expressed or implied. There are no other

warranties expressed or implied which extend

beyond the face hereof, herein, including the im-

plied warranties of merchantability and ﬁtness for

a particular purpose. In no event shall VONROC be

liable for any incidental or consequential damages.

The dealers remedies shall be limited to repair or

replacement of nonconforming units or parts.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc S-OS503DC in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 5,12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Vonroc S-OS503DC Manual

Product: