Manual Vonroc S-CS501DC (page 12 of 72) (English, German, Dutch, French, Italian, Turkish, Spanish)

764092

Zoom out

Zoom in

1/72

WWW.VONROC.COM

While adjusting the laser, never activate the

on/off switch. Accidental starting of the

power tool can lead to injuries.

If the laser (5) ceases to indicate the correct

cutting line, you can readjust the laser. To do so,

adjust the laser adjustment screw (25) and set the

laser until it indicates a correct cutting line.

Adjusting the bevel angle (Fig. A, B)

The 0° cutting mark (9) indicates the position of the

saw blade for straight cuts. The 45° cutting mark (8)

indicates the position of the saw blade for 45° cuts.

1. Loosen the wing bolt (7)

2. Adjust the baseplate (17) to the desired posi-

tion (0°- 45°). The sawing angle (bevel) can be

read on the scale (6).

3. Tighten the wing bolt (7).

Adjusting the cutting depth (Fig. C)

1. Loosen wing bolt (22).

Move the baseplate (17) to the desired position.

The sawing depth) can be read on the scale (23).

3. Tighten the wing bolt (22).

Optimum use

• Hold the work using clamps or a vice to have

both hands free to operate the saw.

• Switch on the saw and place the bottom plate

on the work.

•

Slowly move the saw towards the previously dra-

wn cutting line and slowly press the tool forward.

• Firmly press the bottom plate on the work,

otherwise the circular saw may start to vibrate,

causing the blade to break more easily.

• Let the saw do the job. Do not put undue pres-

sure on the circular saw.

5. MAINTENANCE

Before cleaning and maintenance, always

switch off the machine and remove the

battery pack from the machine.

Clean the machine casings regularly with a soft

cloth, preferably after each use. Make sure that the

ventilation openings are free of dust and dirt. Re-

move very persistent dirt using a soft cloth moiste-

ned with soapsuds. Do not use any solvents such

as gasoline, alcohol, ammonia, etc. Chemicals such

as these will damage the synthetic components.

ENVIRONMENT

Faulty and/or discarded electrical or

electronic apparatus have to be collected at

the appropriate recycling locations.

Only for EC countries

Do not dispose of power tools into domestic waste.

According to the European Guideline 2012/19/EC

for Waste Electrical and Electronic Equipment and its

implementation into national right, power tools that

are no longer usable must be collected separately

and disposed of in an environmentally friendly way.

WARRANTY

VONROC products are developed to the highest

quality standards and are guaranteed free of defects

in both materials and workmanship for the period

lawfully stipulated starting from the date of original

purchase. Should the product develop any failure

during this period due to defective material and/or

workmanship then contact VONROC directly.

The following circumstances are excluded from this

guarantee:

• Repairs and or alterations have been made

or attempted to the machine by unauthorized

service centers;

• Normal wear and tear;

• The tool has been abused, misused or

improperly maintained;

• Non-original spare parts have been used.

This constitutes the sole warranty made by compa-

ny either expressed or implied. There are no other

warranties expressed or implied which extend

beyond the face hereof, herein, including the im-

plied warranties of merchantability and ﬁtness for

a particular purpose. In no event shall VONROC be

liable for any incidental or consequential damages.

The dealers remedies shall be limited to repair or

replacement of nonconforming units or parts.

The product and the user manual are subject to

change. Speciﬁcations can be changed without

further notice.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc S-CS501DC in the language / languages: English, German, Dutch, French, Italian, Turkish, Spanish as an attachment in your email.

The manual is 6,19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Vonroc S-CS501DC Manual

Product: