Manual Vonroc S-CD501DC (page 5 of 32) (English, German, Dutch, French)

763978

Zoom out

Zoom in

1/32

WWW.VONROC.COM

Hold power tool by insulated gripping surfaces

when. performing an operation where the cutting

accessory or fastener may contact hidden wiring

Cutting accessory and fasteners contacting a

“live” wire may make exposed metal parts of

the power tool “live” and could give the opera-

tor an electric shock.

c) Use auxiliary handle(s), if supplied with the

tool. Loss of control can cause personal injury.

d) Use appropriate detectors to determine if utility

lines are hidden in the work area or call the

local utility company for assistance. Contact

with electric lines can lead to ﬁre and electric

shock. Damaging a gas line can lead to explo-

sion. Penetrating a water line causes property

damage.

e) Switch off the power tool immediately when the

tool insert jams. Be prepared for high reaction

torque that can cause kickback. The tool insert

jams when:

- the power tool is subject to overload or;

- it becomes wedged in the workpiece.

f) Hold the machine with a ﬁrm grip. High reaction

torque can brieﬂy occur while driving in and

loosening screws.

g) Secure the workpiece. A workpiece clamped

with clamping devices or in a vice is held more

secure than by hand.

h) Always wait until the machine has come to a

complete stop before placing it down. The tool

insert can jam and lead to loss of control over

the power tool.

SAFETY WARNINGS FOR BATTERY

a) Do not open the battery. Danger of short-

circuiting.

b) Protect the battery against heat, e. g., against

continuous intense sunlight, ﬁre, water, and

moisture. Danger of explosion.

c) In case of damage and improper use of the bat-

tery, vapours may be emitted. Ventilate the area

and seek medical help in case of complaints.

The vapours can irritate the respiratory system.

d) Use the battery only in conjunction with your

Vonroc product. This measure alone protects

the battery against dangerous overload.

e) The battery can be damaged by pointed objects

such as nails or screwdrivers or by force

applied externally. An internal short circuit can

occur and the battery can burn, smoke, explode

or overheat.

SAFETY WARNINGS FOR CHARGER

Intended use

Charge only CD801AA and CD803AA type rechargea-

ble Battery packs with the charger. Other types of bat-

teries may burst causing personal injury and damage.

a) The appliance is not to be used by persons

(including children) with reduced physical, sen-

sory or mental capabilities, or lack of experien-

ce and knowledge, unless they have been given

supervision or instruction.

b) Children being supervised not to play with the

appliance.

c) Do not recharging non-rechargeable batteries!

d) During charging, batteries must be placed in

the well ventilated area!

Electrical safety

Always check that the voltage of the power

supply corresponds to the voltage on the

rating plate.

• Do not use the machine if the mains cable or

the mains plug is damaged.

• Only use extension cables that are suitable

for the power rating of the machine with a

minimum thickness of 1.5 mm2. If you use a ex-

tension cable reel, always fully unroll the cable.

2. MACHINE INFORMATION

Intended use

This cordless drill is intended for driving in and

loosening screws as well as for drilling in wood,

metal and plastic.

TECHNICAL SPECIFICATIONS

Model No. S_CD501DC

Voltage 20V

Chuck capacity 13 mm

Torque settings 21+ Drill mode

No load speed

Position 1:

Position 2:

0-400 /min

0-1500 /min

Weight 1.15 kg

Sound pressure level L

89.9 dB(A), K=3dB(A)

Sound power level L

99.9 dB(A), K=3dB(A)

Hand-arm vibration a

(screwdriving without impact)

0.700 m/s

K=1.5 m/s

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc S-CD501DC in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,84 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Vonroc S-CD501DC Manual

Product: