Manual Vonroc RH501DC (page 9 of 56) (English, German, Dutch, French, Polish, Spanish)

763909

Zoom out

Zoom in

1/56

WWW.VONROC.COM

• SDS drills can be inserted by pushing the drill

into the chuck until a click can be heard. If

needed rotate the SDS drill a little to ensure the

keyway in the bit ﬁts the chuck well.

DO NOT slide the locking sleeve (4) to the

rear when inserting bits.

• To remove the SDS drill, slide the locking sleeve

(4) to the rear and remove the SDS drill while

keeping the sleeve (4) in this position.

4. OPERATION

Hammer drills require very little operator

pressure. Excessive pressure on the tool

can lead to unnecessary overheating of the

motor, and burning of the driven tool. It also

may happen the drill bit deforms and

cannot be removed from the machine again.

The On/Off switch (Fig. A)

• Switch the machine on by pressing the On/Off

switch (1). When releasing the On/Off switch (1)

the machine will turn off.

• The rotation-speed can be continuously adjus-

ted by pressing the On/Off switch (1) deeper or

less deep.

Switching the direction of rotation (Fig. A)

• Direction of rotation counter-clockwise: shift

left/right switch (2) to “ ”.

• Direction of rotation clockwise: shift left/right

switch (2) to “ ”.

Function selection switch (Fig. A)

In order to avoid damage to the machine,

adjusting the function selection switch (5)

shall only be done when machine is not

running.

• Set the function selection switch (5) to “ ” for

drilling or screwing.

• Set the function selection switch (5) to “ ” for

hammer drilling.

User tips

• For large holes, for instance in very hard con-

crete, start using a smaller bit for pilot drilling

ﬁrst, then drill to nominal size.

• Hold the machine ﬁrmly with 2 hands. Be aware

the drill can jam and because of that machine

might suddenly turn (especially when drilling

deep holes).

• Do not apply a lot of pressure on the machine,

let the machine do the work.

5. MAINTENANCE

Before cleaning and maintenance, always

switch off the machine and remove the

battery pack from the machine.

Clean the machine casings regularly with a soft

cloth, preferably after each use. Make sure that the

ventilation openings are free of dust and dirt. Re-

move very persistent dirt using a soft cloth moiste-

ned with soapsuds. Do not use any solvents such

as gasoline, alcohol, ammonia, etc. Chemicals such

as these will damage the synthetic components.

ENVIRONMENT

Faulty and/or discarded electrical or

electronic apparatus have to be collected at

the appropriate recycling locations.

Only for EC countries

Do not dispose of power tools into domestic waste.

According to the European Guideline 2012/19/EC

for Waste Electrical and Electronic Equipment and its

implementation into national right, power tools that

are no longer usable must be collected separately

and disposed of in an environmentally friendly way.

WARRANTY

VONROC products are developed to the highest

quality standards and are guaranteed free of defects

in both materials and workmanship for the period

lawfully stipulated starting from the date of original

purchase. Should the product develop any failure

during this period due to defective material and/or

workmanship then contact VONROC directly.

The following circumstances are excluded from this

guarantee:

• Repairs and or alterations have been made

or attempted to the machine by unauthorized

service centers;

• Normal wear and tear;

• The tool has been abused, misused or

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc RH501DC in the language / languages: English, German, Dutch, French, Polish, Spanish as an attachment in your email.

The manual is 8,03 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Vonroc RH501DC Manual

Product: