Manual Vonroc PS501AC (page 6 of 28) (English, German, Dutch, French)

764080

Zoom out

Zoom in

1/28

WWW.VONROC.COM

3. ASSEMBLY

Before assembly, always switch off the

machine and remove the mains plug from

the mains.

Connecting the dust box (Fig. B)

It is highly recommended to use the machine with

the dust box (3), ensuring optimal dust collection.

• Slide the slot in the dust box over the notch on

the rear dust outlet.

• Twist to lock the box into position.

Note: The dust box should be emptied when the

box is half full to maintain optimal dust collection.

Mounting and removing sanding paper (Fig. C)

• Hold the machine on its side or upside down, as

shown on Fig. C1

• Mount sanding paper (5) with the required grain

size onto the sanding pad (4). Make sure that

the perforation in the sanding paper (5) corres-

ponds with the perforation on the sanding pad

(4), as shown on Fig. C2.

• To remove the sanding paper (5), simply pull the

sanding paper from the sanding pad (4).

Note: Use coarse sanding paper for sanding rough,

uneven surfaces. Use medium sanding paper for

removing the remaining scratches from the coarse

sanding paper. Use ﬁne sanding paper for ﬁnishing

surfaces.

4. OPERATION

Switching on and off (Fig. A)

• To switch on the machine, press the on/off

switch (1) into position I.

• To switch off the machine, press the on/off

switch (1) into position 0.

Hints for optimum use

• Firmly hold the machine with both hands.

• Switch on the machine.

• Place the sanding pad with sanding paper on

the workpiece.

• Slowly move the machine over the workpiece,

ﬁrmly pressing the sanding pad against the

workpiece.

• Do not apply too much pressure on the machi-

ne. Let the machine do the work.

5. MAINTENANCE

Always disconnect the machine from the

main power supply before carrying out any

maintenance work.

Clean the machine casings regularly with a soft

cloth, preferably after each use. Make sure that the

ventilation openings are free of dust and dirt. Re-

move very persistent dirt using a soft cloth moiste-

ned with soapsuds. Do not use any solvents such

as gasoline, alcohol, ammonia, etc. Chemicals such

as these will damage the synthetic components.

ENVIRONMENT

Faulty and/or discarded electrical or

electronic apparatus have to be collected at

the appropriate recycling locations.

Only for EC countries

Do not dispose of power tools into domestic waste.

According to the European Guideline 2012/19/

EC for Waste Electrical and Electronic Equipment

and its implementation into national right, power

tools that are no longer usable must be collected

separately and disposed of in an environmentally

friendly way.

WARRANTY

VONROC products are developed to the highest

quality standards and are guaranteed free of

defects in both materials and workmanship for the

period lawfully stipulated starting from the date of

original purchase. Should the product develop any

failure during this period due to defective material

and/or workmanship then contact VONROC directly.

The following circumstances are excluded from this

guarantee:

• Repairs and or alterations have been made

or attempted to the machine by unauthorized

service centers;

• Normal wear and tear;

• The tool has been abused, misused or

improperly maintained;

• Non-original spare parts have been used.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc PS501AC in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Vonroc PS501AC Manual

Product: