778295
5
Zoom out
Zoom in
Previous page
1/56
Next page
EN
5
WWW.VONROC.COM
Only use extension cables that are suitable for
the power rating of the machine with a minimum
thickness of 1.5 mm
2
. If you use an extension
cable reel, always fully unroll the cable.
2. MACHINE INFORMATION
Intended use
This product is designed as a patio heater for
domestic environments. The heater is intended for
private gardens or other outdoor areas at home.
The heater may not be used to heat an indoor
space, usage as a non-household outdoor space
heater or for the drying of textiles or other mate-
rials. This heater is not equipped with a device to
control the room temperature so do not use this
heater in spaces when they are occupied by per-
sons not capable of leaving the room on their own,
unless constant supervision is provided. The device
is to be used only for its prescribed purpose. Any
other use is deemed to be a case of misuse.
TECHNICAL SPECIFICATIONS
Model No. PH515AC
Voltage 220-240 V~
Frequency 50-60 Hz
Power 1500W
Heating element type Carbon fibre lamp
Heating time 3 seconds
Wave length 3.0-1000 microns
Radiant efficiency
90%
Heating distance
2-3m
Heating area
2-3m
Colour temperature 1600 K
Overheat protection Yes
Electronic soft start Yes
Tip-over safety switch Yes
Ingress protection class IP44
Protection class Class I
Weight 3.8 kg
DESCRIPTION
The numbers in the text refer to the diagrams on
page 2.
1. Handle
2. Power cable
3. On/off switch
4. Heater
5. Protective grill
3. OPERATION
Place the device on a level and steady
surface.
Place the device with a minimum distance
of 1 meter to any object, wall or ceiling.
Switching on/off (Fig. A)
To turn the heater on, put the mains cable in the
mains power supply and put the switch (3) on
the heater to the On position.
To turn the heater off, put to the switch (3) on
the heater to the Off position
Tip-over safety switch (Fig. A, B)
This heater is fitted with a tip-over safety switch. In
the event that the heater falls over (see figure B),
the heater automatically shuts off. Please note that
when the heater is returned to its upright positi-
on, it does not resume its operating immediately.
First switch it off (read ‘switching on/off’), remove
the plug from the socket and check the heater for
damage. In case of damage or malfunctioning do
not use but offer for checking / repair. If there is no
damage, you can simply switch the heater on again
(read ‘switching on/off’).
Carrying handle (Fig. A)
The heater is fitted with a carrying handle (1) for
easy and convenient moving of the device. Do not
move the heater or use the carrying handle when it
is turned on.
4. MAINTENANCE
Always make sure that the machine is not
connected to the mains electricity when you
carry out any maintenance of the mechanism.
CAUTION: Risk of Electric Shock. DO NOT
open or try to repair the heater yourself.
Clean the machine casings regularly with a soft
cloth, preferably after each use. Make sure that
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vonroc PH515AC ALICUDI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc PH515AC ALICUDI in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Turkish, Spanish as an attachment in your email.

The manual is 4.49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info