Manual Vonroc PH501AC - Albano (page 5 of 56) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish)

764173

Zoom out

Zoom in

1/56

WWW.VONROC.COM

sons not capable of leaving the room on their own,

unless constant supervision is provided. The device

is to be used only for its prescribed purpose. Any

other use is deemed to be a case of misuse.

TECHNICAL SPECIFICATIONS

Model No. PH501AC

Voltage 220-240 V~

Frequency 50-60 Hz

Power 1500W

Heating element type Carbon ﬁbre lamp

Heating time 3 seconds

Wave length 3.0-1000 microns

Radiant efﬁciency

90%

Heating distance

2-3m

Heating area

7-9m

Colour temperature 1600 K

Overheat protection Yes

Electronic soft start Yes

Ingress protection class IP44

Protection class Class I

Weight 2.36 kg

DESCRIPTION

The numbers in the text refer to the diagrams on

page 2.

1. Hanging chain

2. Power cable

3. Hanging hook

4. Carbine hook

5. On/off switch

6. Heater

7. Protective grill

8. Remote control

9. Remote control switch

10. Receiver for remote control

3. ASSEMBLY

This heater should be installed by a

competent person, i.e. a qualiﬁed electrician.

Always disconnected the heater from the

electrical supply and allow it to cool before

installation.

Installing the heater (Fig. A, C)

Always mount the device with the supplied

accessories.

Before starting the installation, take the following

into consideration:

• Place the device on a ﬁrm, level ceiling surface;

installation of the heater should be on a strong

rigid support (such as strong wooden beams or

metal rails etc).

• The device must be hung so that there is 50

cm of free space between the heater and any

ceiling, tent canvas etc. There must also be

at least 1.80 m between the ground and the

underside of the device. Refer to Fig. C. The

device can never be hung on a hook in the wall

as it could hang at a slant!

• The Hook used to hang the heater must be able

to take a weight 3 or 4 times that of the heater

itself.

• Ensure that the power supply cable is well

mounted and that it does not come into contact

with reﬂector of the heater or that does not trail

into heated area.

• Do not install the heater on an inﬂammable

surface.

• If the heater is to be used outside, a weatherp-

roof outlet is highly recommended.

• Before drilling ensure that there are no wires or

water pipes in the area where the heater is to

be installed.

To install the heater, follow these steps:

• The device is supplied with a hanging chain (1)

and two carbine hooks (4). Put a carbine hook

(4) on both ends of the chain (1).

• Mount one side of the chain onto the hanging

hook (3) using the carbine hook (4), as shown

on ﬁg. A.

• Provide an attachment point from which the

device can hang down freely and that is sturdy

enough to hold the heater without any pro-

blems. Fix it ﬁrmly in such a way that it cannot

drop, slip, slide or otherwise move.

• Attach the unused carbine hook (4) on the

heater chain onto the provided ceiling hook or

ceiling hanging eye.

• Take into account the minimum distances as

shown on ﬁgure C.

• Plug the patio heater into a grounded power

outlet. Check beforehand if the voltage rating

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc PH501AC - Albano in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish as an attachment in your email.

The manual is 4,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Vonroc PH501AC - Albano Manual

Product: