Manual Vonroc MM501DC (page 4 of 36) (English, German, Dutch, French, Italian, Polish, Spanish)

764070

Zoom out

Zoom in

1/36

WWW.VONROC.COM

1. SAFETY INSTRUCTIONS

Read the enclosed safety warnings, the additional

safety warnings and the instructions. Save the

safety warnings and the instructions for future

reference.

The following symbols are used in the user manual

or on the product:

Read the user manual.

Denotes risk of personal injury, loss of life

or damage to the tool in case of non-obser-

vance of the instructions in this manual.

The product is in accordance with the

applicable safety standards in the European

directives.

GENERAL POWER TOOL SAFETY WARNINGS

• To operate this device safely, the user must

have read and understood these instructions for

use before using the device for the ﬁrst time.

• Observe all safety instructions! Failure to do so

may cause harm to you and others.

• Retain all instructions for use, and safety in-

structions for future reference.

• If you sell or pass the device on, you must also

hand over these operating instructions.

• The device must only be used when it functions

properly. If the product or part of the product is

defective, it must be taken out of operation and

disposed of correctly.

• Beware of the sharp pins, they can cause per-

sonal injury or injury to others.

• Check calibration before use.

• Operate the device properly,conductive material

such as salts, carbon and metal can give false

positive readings.

Using battery-operated devices

•

Only use batteries approved by the manufacturer.

• Danger of ﬁre! Never charge the batteries.

• Keep batteries away from metal objects that

could cause short circuiting when not in use.

There is a risk of injuries and ﬁres.

• Fluid can escape from the battery when used

incorrectly. Battery ﬂuid may result in skin irri-

tations and burns. Avoid contact! In the event of

accidental contact, rinse thoroughly with water.

Immediately seek the aid of a physician in the

event of eye contact.

2. MACHINE INFORMATION

Intended use

The moisture meter is designed for use in wood-

working, water damage restoration, building con-

struction and home renovation. Examples include:

• Checking for moisture and mold on or below the

surface of carpets and subﬂooring;

• Measuring the moisture content of wood, dry-

wall or cement board before painting, wallpape-

ring, sealing or treating;

• Locating water leaks above ceilings, below

ﬂoors or behind walls;

• Selecting dry lumber, for example ﬁrewood.

Improper use may damage the tool.

TECHNICAL SPECIFICATIONS

Model no. MM501DC

Measurement Ranges

5 to 50% for wood

1.5 to 33% for building

materials

Measurement Accuracy ±2% for wood and building

material

Measurement Resolution 0.1%

Calibration Check Range

17.3% to 19.3%

Excessive-moisture alarm

levels

>16% for wood

>20% for building materials

LCD Size

51mm diagonal, with three

13mm high digits

Bar Graph Composition

3 each green, orange and

red LEDs

Auto Power Off Trigger 1 minute of inactivity

Low Battery Icon Trigger <7V

Operating Temperature 0° to 40°C

Operating humidity <70%RH non-condensing

Storage Temperature -10° to 50°C

Storage humidity 5%~95% RH

(without battery)

Dimensions 174 x 70 x 74mm

Weight 150g without battery

Power Source

(1) ‘9V’ battery (included)

9V 6F22 or 6LR6

recommended

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc MM501DC in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 1,89 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Vonroc MM501DC Manual

Product: