764124

Vonroc LR501DC Manual

6
Zoom out
Zoom in
Previous page
1/52
Next page
6
EN
WWW.VONROC.COM
• If desired, multiple colours can be used to
repair a damage.
Tip! Always build up the colour from light to
dark.
• For larger or deep damaged areas, it is recom-
mended to combine the transparent wax (K)
together with the chosen base colour in order
to create a better matching result.
Melting the Wax (Fig. D)
• Turn the device on like mentioned in “switching
the device On/Off”.
• Melt a small amount of wax by using the wax
melting tip (2) and transfer to wax to the dam-
aged area.
Risk of burns! Avoid skin contact with the
device and protect yourself from dripping
wax!
Filling the damaged area (Fig. E)
• Fill the damaged area with wax layer by layer
until the area is completely filled with wax.
Make sure there is a slightly excessive amount
of wax used. The redundant wax will be scraped
off, as explain in “finishing and fine matching”.
• For vertical surfaces it is advisable to mix the
colour beforehand and apply quickly with the
scrapper.
Finishing and fine matching (Fig. F - H)
• Allow the wax to cool for a few seconds for
small damaged areas.
• The cool down time depends on the size and
depth of the damaged area.
• With light pressure carefully remove excessive
wax with the ribbed side of the flattening scrap-
er (9). Repeat this several times in different
directions.
• Wipe the abrasive sponge (10) over the filled
area to degrease the surface.
When repair of the damaged area is done
always switch off the device and place the
protection cap back on the device.
5. MAINTENANCE
Cleaning (Fig. I)
• The flattening scraper (9) can be cleaned with
the serrated edges of the cleaning scraper (8).
• Clean the wax melting point (2). Residue must
be removed.
• Let the melting tip cool before placing the pro-
tection cap back on the device.
NOTICE! Risk of product damage! Never
submerge device in water while cleaning.
Do not use cleaning agents or solvents. Wipe the
device using a dry cloth.
Changing the batteries
• Open the battery compartment (7).
•
Place batteries. Pay attention to correct polarity!
• Close battery compartment.
Storage
NOTICE! Risk of product damage!
• Store the product in a dry, well-ventilated place.
• Only store and transport the product in its origi-
nal packaging.
Taking out of operation for a longer period of time
• When not in use for a longer period of time,
remove the batteries.
NOTICE! Risk of product damage! Old, leaky
batteries can damage the product. Check
the battery regularly.
ENVIRONMENT
Faulty and/or discarded electrical or
electronic apparatus have to be collected at
the appropriate recycling locations.
Only for EC countries
Do not dispose of power tools into domestic waste.
According to the European Guideline 2012/19/EU
for Waste Electrical and Electronic Equipment and its
implementation into national right, power tools that
are no longer usable must be collected separately
and disposed of in an environmentally friendly way.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vonroc LR501DC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc LR501DC in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info