819204
15
Zoom out
Zoom in
Previous page
1/162
Next page
EN
15
WWW.VONROC.COM
When the lights are not burning it means the bat-
tery is empty and must be charged immediately.
Charging the battery with the CD802AA charger
(Fig. K)
1. Take the battery (23) from the machine.
2.
Turn the battery (23) to upside down position and
slide it onto the charger (26) as shown in Fig. K.
3. Push the battery until it is fully pushed into the
slot.
4.
Plug the charger plug into an electrical outlet and
wait for awhile. The LED indicators on the charger
(27) will lighten up and show the charger status.
The charger has 2 LED indicators (27) which indicate
the status of the charging process:
Red LED
Status
Green LED
status Charger status
Off Off No power
Off On
Standby mode:
- No battery is inserted or,
- Battery inserted but
charging has finished
On Off Battery charging in progress
Fully charging the 4Ah battery may take up to
120 minutes.
After the battery is fully charged remove the charg-
er plug from the outlet and remove the battery from
the charger.
When the machine is not being used over
alonger period of time it is best to store the
battery in charged condition.
Charging the battery with the CD820AA dual
charger (Fig. L)
1. Take the battery (26) from the machine.
2. Turn the battery (26) to upside down position
and slide it onto the charger (30) as shown in
Fig. L.
3. Push the battery until it is fully pushed into the
slot.
4. Plug the charger plug into an electrical outlet
and wait for awhile. The LED indicators on the
charger (31, 32, 33) will lighten up and show
the charger status.
The charger has 6 LED indicators (31, 32, 33)
which indicate the status of the charging process:
Item Conditions LED colour
Red Amber Green
Stand by Power on On On On
Charging Started charging
(10-19V DC±0.5V DC) Blink Off Off
Halfway charging
(19-20V DC±0.5V DC) On Blink Off
Finished charging
(20-21V DC±0.5V DC) On On Blink
Fully
charged
Trickle charging
≤300±150mA On On On
Stop charging
High tem-
perature
High-temperature
protection of the
battery works
On On On
Fully charging the 4Ah battery may take up to
85 minutes.
After the battery is fully charged remove the charger
plug from the outlet and remove the battery from the
charger.
When the machine is not being used over
alonger period of time it is best to store the
battery in charged condition.
Assembling the lower handle (Fig. A, B)
1. Mount the lower handle (14) onto the lawn
mower body, as shown on figure B.
2. Put the washer (34C) onto the bolt (34B).
3. Screw the handle adjustment knob (34A) onto
the bolt (34B) with assembled washer and
secure the handle by closing it.
4. Repeat these steps for the other side.
Assembling the upper handle (Fig. A, C, D)
1. Attach the upper handle (1) to the lower handle
(14).
2. Secure the upper handle (1) by inserting the
bolts (15B), washers (15C) and handle knobs
(15A) as shown on figure C.
3. Fixate the cable to the handle by using the
cable holders (6), as shown on figure D.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vonroc LM505DC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc LM505DC in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 22.27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info