764066

Vonroc LL501DC Manual

6
Zoom out
Zoom in
Previous page
1/40
Next page
EN
6WWW.VONROC.COM
2. MACHINE INFORMATION
Intended use
The cross line laser is intended for determining and
checking horizontal and vertical lines onto the wall
and is therefore designed for aligning objects such
as tiles or pictures. The cross line laser is suitable
for indoor use.
TECHNICAL SPECIFICATIONS
Model No. LL501DC LL502DC
Number of lines 2
Direction of beams Vertical/level
Colour of laser line Red Green
Laser Wavelength 620 ~ 690 nm 510 ~ 530 nm
Laser class II (<mW) acc. to
EN60825-1: 2014;
Working range* 15m 20m
Accuracy ± 0.8 mm/m
Self-levelling range ± 5°
Levelling time 4 s
Protection IP 20
Tripod connection 1/4"
Recommended tripod LL801AA
Operating time, max. 14 hours 4 hours
Operating temperature -10 ~ 40 °C
Storage temperature -20 ~ 70 °C
Battery 2x 1.5V type LR03 AAA
(alkaline)
Weight (Without Batteries) 190 g
Dimensions 65x55x70 mm
* The working range may be reduced by unfavoura-
ble environmental conditions (e.g. direct sunlight).
DESCRIPTION
The numbers in the text refer to the diagrams on
page 2-4.
Fig. A
1. Operating mode button / on / off
2. Lock switch / on / off
3. Laser beam outlet
4. ¼ inch tripod connection
5. Battery cover
6. Universal clamp
7. Clamping jaws
8. Locking knob (for clamping jaws)
9. Adjusting knob (for ball joints)
3. ASSEMBLY
Inserting / replacing the batteries (Fig. B)
1. Open the battery compartment cover (5).
2. If applicable, remove the old batteries.
3. lnsert batteries with correct polarity according
to indications.
4. Close the battery compartment cover (5).
Using the universal clamp (Fig. C)
1. Screw the universal clamp (6) into the tripod
connection (4) at the device.
2. Loosen the locking knob (8) and push the
clamping jaws (7) apart until they fit onto the
carrier.
3. Tighten the locking knob (8) until the jaws of
the universal clamp (6) are firmly attached to
the carrier and the mount can no longer be
moved.
4. Loosen the adjusting knob (9).
5. Swivel the device to the desired position.
6. Retighten the adjustment knob (9).
7. To unfasten the clamping jaws, loosen the uni-
versal clamp (6) until the can be removed from
the carrier without difficulty.
Using the tripod (not included)
1. Place the device with the 1/4” tripod connec-
tion (4) on the thread of the tripod or a conven-
tional camera tripod.
2. Roughly align the tripod before switching on the
device.
4. OPERATION
Only the centre of the laser line must be
used for marking. The width of the laser line
changes depending on the distance.
It’s recommended to carry out an accuracy
check before first use and periodic checks
during future use, especially for precise
layouts. Also when the laser may have been
dropped.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vonroc LL501DC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc LL501DC in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info