763900

Vonroc LB501AC Manual

7
Zoom out
Zoom in
Previous page
1/44
Next page
EN
7WWW.VONROC.COM
• Use only genuine replacement parts and acces-
sories.
Immediately switch off the machine when:
• Excessive sparking of the carbon brushes and
clutter in the collector.
• Interruption of the mains plug, mains lead or
mains lead damage.
• Defect switch.
• Smoke or stench of scorched isolation.
Electrical safety
Always check that the voltage of the power
supply corresponds to the voltage on the
rating plate label.
• Do not use the machine if the mains cable or
the mains plug is damaged.
• Only use extension cables that are suitable
for the power rating of the machine with a
minimum thickness of 1.5 mm2. If you use an
extension cable reel, always fully unroll the
cable.
2. MACHINE INFORMATION
Intended use
The leaf blowers are developed to remove leaves
from the street, garden and lawn. A fan inside the
leaf blower causes a flow of air, which can be used
to blow leaves away or to vacuum the leaves into
the collection bag.
TECHNICAL SPECIFICATIONS
Model No. LB501AC
Voltage 230-240V 50Hz
Input power 3000 W
No load speed 14000 rpm
Max. blower velocity 270 km/h
Max air volume 13.2 m/min
Shredding ratio 10:1
Blower bag capacity 35 L
Weight 3.0 kg
Sound pressure level (Lpa) 84.1dB(A), K=3dB(A)
Acoustic power level (Lwa) 95.8dB(A), K=2.21 dB(A)
Vibration 7.490m/s
2
, k=1.5m/s
2
Vibration level
The vibration emission level stated in this instruc-
tion manual has been measured in accordance
with a standardized test given in EN60745; it may
be used to compare one tool with another and as
a preliminary assessment of exposure to vibration
when using the tool for the applications mentioned.
• Using the tool for different applications, or with
different or poorly maintained accessories, may
significantly increase the exposure level.
• The times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level.
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work patterns.
DESCRIPTION
The numbers in the text refer to the diagrams on
pages 2-3.
1. Main handle
2. Auxiliary handle
3. Power cord
4. Cable hook
5. On/off switch
6. Upper tube
7. Lower tube
8. Vacuum bag
9. Vacuum bag inlet tube
10. Leaf bag securing clip
11. Blow/vacuum option lever
12. Carrying belt hook
13. Wheel holder
14. Wheels
15. Carrying belt
3. ASSEMBLY
Before assembly, always switch off the
machine and remove the mains plug from
the mains.
Assembling the tubes (Fig. A, B)
• Screw the upper tube (6) onto the motor hou-
sing.
• Screw the lower tube section (7) onto the upper
tube (6).
• Mount the included wheel holder (13) by sliding
it onto the lower tube section (7) until the
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vonroc LB501AC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc LB501AC in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info