804985

Vonroc JR501DC Manual

8
Zoom out
Zoom in
Previous page
1/72
Next page
8
EN
WWW.VONROC.COM
18. Antenna tip
19. USB port cover
20. Battery LED indicators button
21. Battery LED indicators
22. Charger
23. Charger LED indicators
3. ASSEMBLY
The battery must be charged before fi rst use.
Inserting the battery into the machine (Fig. B)
Ensure that the exterior of the battery is
clean and dry before connecting to the
charger or machine.
1. Insert the battery (4) into the base of the
machine as shown in Fig. B.
2. Push the battery further down until it clicks into
place.
Removing the battery from the machine (Fig. B)
1. Push the battery unlock button (5).
2. Pull the battery out of the machine like shown
in Fig. B.
Checking the battery charging status (Fig. F)
• To check the battery charge status, push the
button (20) on battery shortly.
• The battery has 3 lights indicating the charge
level, the more lights that burn, the more charge
the battery has left.
• When the lights are not burning it means
the battery is empty and must be charged
immediately.
Charging the battery with the charger (Fig. F)
1. Take the battery (4) from the machine.
2. Turn the battery (4) to upside down position and
slide it onto the charger (22) as shown in Fig. F.
3. Push the battery until it is fully pushed into the
slot.
4. Plug the charger plug into an electrical outlet
and wait for a while. The LED indicators on
the charger (23) will lighten up and show the
charger status.
Red LED Status Green LED status Charger status
Off Off No power
Off On
Standby mode:
- No battery is
inserted or,
- Battery inserted
but charging has
fi nished
On Off Battery charging in
progress
• Fully charging the 2Ah battery may take up to
60 minutes.
• Fully charging the 4Ah battery may take up to
120 minutes.
After the battery is fully charged remove the
charger plug from the outlet and remove the
battery from the charger.
When the machine is not being used over a
longer period of time it is best to store the
battery in charged condition.
Setting the antenna (Fig. C)
• Point the antenna upwards.
• Take the tip (18) and pull it out to a total length
of 30cm, there are 5 sections.
• Point the antenna (17) toward the direction that
enables the best reception.
Tip! When the reception is insuffi cient,
position the radio at a different location that
enables better reception.
4. OPERATION
Place the product on an even surface to
prevent falling.
Turn on/ turn off (Fig. D)
• Hold the power button (7) for a few seconds to
turn on the radio. Until you hear “power on”.
• Hold the power button (7) for a few seconds to
turn off the radio. Until you hear “power off”.
Adjusting volume (Fig. D)
• Increase volume: press “+” button (13).
• Decrease volume: press “-” button (14).
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vonroc JR501DC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc JR501DC in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish as an attachment in your email.

The manual is 0.75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info