764012
6
Zoom out
Zoom in
Previous page
1/52
Next page
6
EN
WWW.VONROC.COM
Prevent damage of the heating element. Do not
lock or block the mouth piece;
Do not leave the appliance when switched on;
Do not use the appliance for drying hair or for
drying living human beings in general;
Do not use the appliance in a bath, above water
or in spaces where easy inflammable liquids are
used.
This appliance operates at a temperature of
600 degrees without visible signs of this
temperature (no flames), still there is a
chance of fire risk. Watch out for the hot air
stream from the mouth piece. This air
stream can cause burns.
When operating the appliance
If you are going to use the hot air gun, vapours
and gas can be released during a short time.
This can be harmful for your health. Asthmatics
can suffer hindrance of it;
Before connecting the plug to the mains voltage
you have to check if the switch is in position “0”;
Keep the mains lead always away from the
mouthpiece of the hot air gun;
Keep children and animals away from the appli-
ance if you are using it.
Immediately switch off the appliance when:
Plug and/or cable are defective or damaged;
The switch is defective;
You smell or see smoke caused by scorched
insulation from the hot air gun.
Electrical safety
When using electric machines always observe the
safety regulations applicable in your country to
reduce the risk of fire, electric shock and personal
injury. Read the following safety instructions and
also the enclosed safety instructions.
Always check that the power supply
corresponds to the voltage on the rating
plate.
Class II machine - Double insulation - You
don’t need any earthed plug
2. MACHINE INFORMATION
Intended use
This hot air gun is intended for a wide range of
applications including plastic welding, the defor-
mation of material, heat-shrink tubing, removing
material residues or drying paint. It is also suitable
for loosening of adhesive joints and the defrosting
of water lines.
TECHNICAL SPECIFICATIONS
Model No. HA501AC
Voltage 220-240 V~
Frequency 50 Hz
Power input 2000 W
Weight 0.66 kg
IP Class IP 20
Position I
Air flow 500 l/min
Air temperature 50 °C
Position II
Air flow 250 l/min
Air temperature 400 °C
Position III
Air flow 500 l/min
Air temperature 600 °C
Vibration level
The vibration emission level stated in this instruc-
tion manual has been measured in accordance
with a standardized test given in EN60745; it may
be used to compare one tool with another and as
a preliminary assessment of exposure to vibration
when using the tool for the applications mentioned.
Using the tool for different applications, or with
different or poorly maintained accessories, may
significantly increase the exposure level.
The times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level.
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work pat-
terns.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vonroc HA501AC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc HA501AC in the language / languages: English, German, Dutch, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 3,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Vonroc HA501AC

Vonroc HA501AC User Manual - English, German, Dutch, French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info