Manual Vonroc GT501DC (page 12 of 64) (English, German, Dutch, French, Italian, Polish, Spanish)

764167

Zoom out

Zoom in

1/64

WWW.VONROC.COM

Tilting the trimmer head (Fig. H)

Please keep power switched off and

disconnect the battery.

• Press the knob (20) of the trimmer head to tilt

the head in the desired position.

• When knob is released, the head will click and

lock in the chosen position.

Turning the trimmer head (Fig. I)

• Press the ring (21) down towards the trimmer

head to turn the head in the desired position.

• When the ring is released, the head will click

and lock in the chosen position.

Adjusting the pole height (Fig. J)

• To adjust the height of the machine, loosen the

lower adjustment ring (22).

• Carefully push the lower shaft (24) from the

upper shaft (23) down or upwards.

• Fasten the lower adjustment ring (22) to secure

the height of the machine.

Using your grass trimmer

Before use, always visually inspect the

machine and its parts are correctly

mounted, not worn out or damaged.

• For your own safety and for best results read

the following user advice and do not use this

product for anything other than its intended

purpose.

• This grass trimmer is made for cutting grass.

All other use that is not speciﬁcally allowed in

this manual may lead to damage to the grass

trimmer or injury to the user.

Safety features

• The protection guard has a knife for cutting

the wire to the correct length. Do not touch the

knife to reduce the chance of injury to the user.

• The on/off switch (6) and safety switch (7)

must be operated together to start the motor.

If pressure on one of two switches is released,

the tool is designed to stop rapidly.

Switching On and Off

• To switch the trimmer on, press the safety

switch (7) and the start on/off switch (6) at the

same time.

• To switch off, release one or both switches.

5. MAINTENANCE

Before cleaning and maintenance, always

switch off the machine and remove the

battery pack from the machine.

Clean the machine casings regularly with a soft

cloth, preferably after each use. Make sure that the

ventilation openings are free of dust and dirt. Re-

move very persistent dirt using a soft cloth moiste-

ned with soapsuds. Do not use any solvents such

as gasoline, alcohol, ammonia, etc. Chemicals such

as these will damage the synthetic components.

ENVIRONMENT

Faulty and/or discarded electrical or

electronic apparatus have to be collected at

the appropriate recycling locations.

Only for EC countries

Do not dispose of power tools into domestic waste.

According to the European Guideline 2012/19/EC

for Waste Electrical and Electronic Equipment and its

implementation into national right, power tools that

are no longer usable must be collected separately

and disposed of in an environmentally friendly way.

WARRANTY

VONROC products are developed to the highest

quality standards and are guaranteed free of defects

in both materials and workmanship for the period

lawfully stipulated starting from the date of original

purchase. Should the product develop any failure

during this period due to defective material and/or

workmanship then contact VONROC directly.

The following circumstances are excluded from this

guarantee:

• Repairs and or alterations have been made

or attempted to the machine by unauthorized

service centers;

• Normal wear and tear;

• The tool has been abused, misused or

improperly maintained;

• Non-original spare parts have been used.

This constitutes the sole warranty made by compa-

ny either expressed or implied. There are no other

warranties expressed or implied which extend

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Vonroc GT501DC in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 7,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Vonroc GT501DC Manual

Product: